Tiled stove joint

SKU: 3021-35

Tiled stove joint

EUR13.66

Available in central stock
Quick facts

Additional information

Weight 1.15 kg
Material

Titanium white and chalk
Quantity

1 kg
Consumption

Enough for about 1-3 tiled stoves
Note!

Avoid inhaling dust

On tiled stoves, the gaps between the tiles and between the door frame and vents are usually grouted with a special stove grout. This grout is “softer” and more pliable than the tile grout normally used to grout wall tiles.

The reason why the joint is softer is that a tiled stove, when fired and cooled, shrinks and swells much more than wall and floor tiles.

Gysinge’s ready-mixed stove grout is based on a traditional mixture of chalk and titanium white. It is therefore white in color and is most suitable for white ovens. If you have a colored oven, you add pigment in the appropriate color and stir well before stirring it all out with water.

Instructions are included in the package. It is also available in PDF format under the heading Documents (at the Add to cart button).

Tips! The bucket contains enough for several ovens. Therefore, soak only the amount you need and save the rest for another time.

Description

On tiled stoves, the gaps between the tiles and between the door frame and vents are usually grouted with a special stove grout. This grout is “softer” and more pliable than the tile grout normally used to grout wall tiles.

The reason why the joint is softer is that a tiled stove, when fired and cooled, shrinks and swells much more than wall and floor tiles.

Gysinge’s ready-mixed stove grout is based on a traditional mixture of chalk and titanium white. It is therefore white in color and is most suitable for white ovens. If you have a colored oven, you add pigment in the appropriate color and stir well before stirring it all out with water.

Instructions are included in the package. It is also available in PDF format under the heading Documents (at the Add to cart button).

Tips! The bucket contains enough for several ovens. Therefore, soak only the amount you need and save the rest for another time.

Additional information

Weight 1.15 kg
Material

Titanium white and chalk
Quantity

1 kg
Consumption

Enough for about 1-3 tiled stoves
Note!

Avoid inhaling dust

Reviews

There are no reviews yet.

Be the first to review “Tiled stove joint”

Your email address will not be published. Required fields are marked *


The reCAPTCHA verification period has expired. Please reload the page.

Dokument

Instruction tiled stove joint

You may also need to

The heat in old houses

EUR25.22

Add to cart

Stove clay 5 kg

EUR34.39

Add to cart

Spark grid for tiled stove

EUR77.49

Add to cart

Fire equipment complete

EUR228.79

Add to cart

Related products

Damper chain nickel plated

Chains of the so-called patent model to be used for draft dampers on tiled stoves, spiral valves, etc. Thin, flexible and supple, yet strong and durable.

Can be mounted in two ways; Firstly, as a hanging arc in a single length. This method is suitable for spiral valves, for example. Partly hanging in two lengths with damper tassels as termination. This was common on the draught dampers of tiled stoves.

Normally, 150-200 cm of chain is needed depending on how high the stove is and how far down you want the chain to hang. The easiest way to shorten or cut the chain is with wire cutters.

Nickel-plated brass. Width 3 mm, price per meter.

EUR8.07

Butterfly tassel 1900s nickel plated

The 20th century damper tassels, which were attached to the damper chains and cords of the tiled stoves, are usually just turned, unlike the 19th century, which really looked like real tassels. We have now produced such a neat 1900s model with fine turning and attention to detail. The tassels are available in two versions, in brass for tiled stoves with brass doors and in nickel-plated brass for stoves with nickel-plated doors.

Nickel plated brass. Height 34mm, diameter 15mm

EUR10.91

Refractory clay mortar

Clay and iron filings for insulating iron stoves. The kit is enough for a large iron stove and only water needs to be added. 2 bags of clay, 1 bag of iron filings. Total about 5 kg.

Why is refractory mortar needed for iron stoves?

In iron cookers, the roof of the oven section needs to be covered with clay mortar to provide more even heat in the oven and to prevent the heat from rising and falling too quickly when firing. The mortar is also necessary to prevent the stove from cracking if the fire is too hot. In old iron stoves, you can usually only see the remains of this insulation in the form of a layer of gravel on top of the stove. Refractory clay mortar should only be laid on top of the stove roof.

Contains clay mixture (1 part clay flour and 3 parts sand) and iron filings. Instructions are included. It is also available as a PDF under the heading Documents (at the Add to cart button).

EUR36.59

Soot hatch pressed brass

Soot hatch on black plate support. Available in both polished brass and bright nickel-plated. Suitable as a soot hatch on tiled stoves, in walls, etc.

EUR49.98

Brass spiral valve

Spiral valve intended for tiled stoves, ventilation in walls etc. Available in both polished brass and bright nickel-plated. Supplied on black plate but also suitable for 100 mm spiral pipes.

Diameter 104 mm butt (outer dimension).

EUR58.60

Spiral valve nickel plated

Spiral valve intended for tiled stoves, ventilation in walls etc. Available in both polished brass and bright nickel-plated. Supplied on black plate but also suitable for 100 mm spiral pipes.

EUR59.51

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop