Decorative LED lamp. As a worthy replacement for the beautiful old carbon wire lamp, we have a series of LED lamps (light-emitting diodes) in clear glass and visible filament. These lamps are both efficient and decorative and give off many hours of warm, yellow light. Given their energy efficiency, it could be said that LEDs waste light but are economical in terms of energy consumption.

LED filament lamps are a combination of modern technology and incandescent design that harks back to the design language of the early 1900s.

Chandelier. Clear glass. Dimmable. E14 base. 4 W soft glow, 350 lm.

Smooth, round black porcelain ball box for surface mounting. Newly manufactured according to traditional model.

4 break walls on opposite sides.

ASSEMBLE AS FOLLOWS: Carefully tap out the break walls you intend to use. Screw the bottom of the box in place with suitable screws. Connect the cables. Screw the upper part in place with the appropriate screw.

Square junction box in white porcelain for surface mounting. Newly manufactured in a classic model.

4 break walls on opposite sides and 2 in corners.

ASSEMBLE AS FOLLOWS: Carefully tap out the break walls you intend to use. Screw the bottom of the box into place with the appropriate screws. Connect the cables. Screw on the cover with the appropriate screw.

Chronic dimmer LD200KRON from Vadsbo. Together with a resilient push button, the dimmer creates a dimmer function.

Crown dimmer means two dimmers in the same enclosure. The product is designed to be installed in A or B boxes. Installed in an appliance or in a junction box, for example behind the switch or in the ceiling cup.

LD200KRON is specially adapted for dimming low energy and LED lamps. The dimmer is equipped with two control inputs and you can thus mix different loads on the outputs. The product can handle a load of up to 100VA per channel and has an adjustable minimum dimming level.

For example, the dimmer can be controlled by a resilient switch. See for example: 31-330-17-2, 31-330-27-2, 3041-46-91