Great for repairing glaze damage on tiled stoves etc.

Pond varnish is traditionally used on tiled stoves instead of linseed oil paint. This is because pond varnish does not turn yellow when the stove gets hot.

Prepare the duster solution in the same way as when making linseed oil paint. Stir the color pigments with the dust solution to form a porridge. Then dilute with additional solution to the appropriate consistency. If the kiln is really old and dull, you can dilute the colored duster solution with turpentine, so that it becomes less shiny. If the damage to the glaze consists only of small scratches or occasional chips, it is usually sufficient to paint over them with a dusting solution as above, and omit the plasterwork altogether. With the right color in the wounds, they will disappear to the eye anyway. Repeat the treatment if the paint did not cover enough the first time.

Tips! V years of experience is that Gysinge linseed oil paint does not yellow like others. Therefore, as an alternative to a dust solution, try painting the damage with Gysinge paint instead.

Tassels from the 1910s. Tassels from the turn of the 20th century are usually only turned, unlike those from the 19th century, which really resembled real tassels.

We have produced an Art Nouveau model with fine turning and care in the details. The model for this damper is from Tyskbo Bergsmanssmedja in By parish Horndal.

Untreated brass. Height 60mm.

Clay and iron filings for insulating iron stoves. The kit is enough for a large iron stove and only water needs to be added. 2 bags of clay, 1 bag of iron filings. Total about 5 kg.

Why is refractory mortar needed for iron stoves?

In iron cookers, the roof of the oven section needs to be covered with clay mortar to provide more even heat in the oven and to prevent the heat from rising and falling too quickly when firing. The mortar is also necessary to prevent the stove from cracking if the fire is too hot. In old iron stoves, you can usually only see the remains of this insulation in the form of a layer of gravel on top of the stove. Refractory clay mortar should only be laid on top of the stove roof.

Contains clay mixture (1 part clay flour and 3 parts sand) and iron filings. Instructions are included. It is also available as a PDF under the heading Documents (at the Add to cart button).

Spiral valve intended for tiled stoves, ventilation in walls etc. Available in both polished brass and bright nickel-plated. Supplied on black plate but also suitable for 100 mm spiral pipes.

Diameter 104 mm butt (outer dimension).