SKU: 3031-211-3

Kitchen stove rod brass 1.5 m complete

EUR421.36

Available in central stock
Quick facts

Additional information

Material

brass, polished

Length

155 cm

hooks

8 pcs

Wall brackets

3 pcs

End knob

2 pcs

Coupling fittings

1 pc

Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in bathrooms. The model was common from the late 1800s until the 1930s.

MATERIAL Made of solid brass or in nickel-plated version. Polished shiny surface, but not lacquered. The brass darkens over time if you do not polish it.

MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are screwed (carefully!) into the wall. The hooks and brackets are then screwed onto the pole. Last of all, you tighten the screws that prevent the bar from rolling.

TIP! The bar can be shortened by sawing it off. It can also be connected to another pole if you want a longer version. In this case, a wall bracket should be placed over the joint.

Cast, polished brass or nickel-plated. Short rod set (105 cm) includes 2 wall brackets, 5 hooks and two end knobs. The long rod set (155 cm) includes 3 wall brackets, 8 hooks and two end knobs. The end knobs are of the same model as on our brass knob for drawers and hatches. On the long rod, the tube is two-piece with a splicing part that is hidden by the wall bracket during assembly. The parts can also be purchased separately.

Description

Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in bathrooms. The model was common from the late 1800s until the 1930s.

MATERIAL Made of solid brass or in nickel-plated version. Polished shiny surface, but not lacquered. The brass darkens over time if you do not polish it.

MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are screwed (carefully!) into the wall. The hooks and brackets are then screwed onto the pole. Last of all, you tighten the screws that prevent the bar from rolling.

TIP! The bar can be shortened by sawing it off. It can also be connected to another pole if you want a longer version. In this case, a wall bracket should be placed over the joint.

Additional information

Material

brass, polished

Length

155 cm

hooks

8 pcs

Wall brackets

3 pcs

End knob

2 pcs

Coupling fittings

1 pc

Reviews

There are no reviews yet.

Be the first to review “Kitchen stove rod brass 1.5 m complete”

Your email address will not be published. Required fields are marked *


The reCAPTCHA verification period has expired. Please reload the page.

You may also need to

Related products

Wardrobe hook 8141 Nickel plated

Model: Eskilstuna Jernmanufaktur No. 1041

Period: 1895-1960

Screw not included.

Matching screw number 19

EUR11.92

Screw hook nickel-plated, medium

Turn-of-the-century screw hook made of solid nickel-plated brass with iron screw part. Common in the past as a clothes hook in rooms and hallways, as a towel rack in kitchens, etc.

Also available in brass. See related products.

Total length approx. 60 mm, of which the hook approx. 43 mm.

EUR14.67

Lion pot small

Before flowerpot production became an industry in Sweden around the turn of the century 1900, there were a number of potters who made flowerpots, among other things. Typical of their handmade pots is that you can see the imprints of the potter’s hands in the ware. The hand-turning process produces low ridges on the surface that are visible both inside and out.

A hand-turned pot is not as rigid as a machine pot, it is more personal and has more life and variety. A detail that also reveals the real craftsmanship is the soft, rounded edge at the top. It can certainly be made by machine, but it will never be as soft and individual as on a hand-turned pot.

Gysinge’s small lion pots also have two lion mascots on the chest, a common decoration in the early 19th century.

EUR59.15

Tile beveled edges 15x15cm 0,5 sqm

The Gysinge tile is a beveled tile for bathrooms and kitchens of a model that was common in Sweden in the late 19th and early 20th centuries. Several Swedish tile manufacturers existed at the time, including Ekeby Bruk in Uppsala.

What distinguishes Swedish tiles from international models is that Swedish tiles are usually square, not rectangular, and that they are available in so many parts, including half-tiles, borders and moldings, that a complete set can be made. The tiles are thick and strong and have a vibrant surface precisely because they are handmade and fired in old kilns. The glazing is also done by hand, which further enhances the rustic impression. All tiles are labeled “Gysinge” on the back.

EUR164.60

Kitchen stove rod brass 80 cm complete

Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in the kitchen, or in the bathroom. The model was common from the late 19th century until the 1930s.

MATERIAL Highest quality. Sand-cast brass. Polished shiny surface, but not lacquered. The brass darkens over time if not polished.

Length with knobs 80 cm

MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are carefully screwed into the wall. The hooks and brackets are then screwed onto the bar. Last of all, tighten the screws that prevent the bar from rolling.

TIP The bar can be shortened by sawing it off. It can also be connected to another pole if you want a longer version. In this case, you should use a so-called coupling sleeve and place a wall bracket over the joint.

Also available in nickel-plated version.

EUR274.64

Kitchen stove rod brass 105 cm complete

Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in the kitchen, or in the bathroom. The model was common from the late 19th century until the 1930s. Highest quality.

MATERIAL Made of solid brass or in nickel-plated version. Polished shiny surface, but not lacquered. The brass darkens over time if you do not polish it.

MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are screwed (carefully!) into the wall. The hooks and brackets are then screwed onto the pole. Lastly, tighten the screws that prevent the bar from rolling.

The bar can be shortened by sawing it off. It can also be connected to another pole if a longer version is desired. In this case, a wall bracket should be placed over the joint and an additional coupling fitting should be purchased.

EUR306.74

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop