SKU: 5181010001

Cabinet rule 5181

EUR11.46

Available in central stock
Quick facts

Additional information

Weight 0.1 kg
Material

Stainless steel, Steel end plates

Surface treatment

Polished stainless steel, End plate untreated

Model: Albert Karlsson Metallfabriksbolag “Ticka Standard”

Period: 1930-1960

An end cap is included.

This model is intended for overlapping doors.

It is placed vertically at the top edge of the door on lower cabinets (as shown), vertically but upside down compared to the picture at the bottom edge of upper cabinets, and horizontally on the side of the door on upper cabinets.

When installing cabinet frames on lacquered cabinet doors, the screws should not be overtightened to avoid cracking the lacquer.

Use a screwdriver instead of a screwdriver.

Screw not included.

Matching screw number 9 for the bolt and screw number 19 for the end plate

Description

Model: Albert Karlsson Metallfabriksbolag “Ticka Standard”

Period: 1930-1960

An end cap is included.

This model is intended for overlapping doors.

It is placed vertically at the top edge of the door on lower cabinets (as shown), vertically but upside down compared to the picture at the bottom edge of upper cabinets, and horizontally on the side of the door on upper cabinets.

When installing cabinet frames on lacquered cabinet doors, the screws should not be overtightened to avoid cracking the lacquer.

Use a screwdriver instead of a screwdriver.

Screw not included.

Matching screw number 9 for the bolt and screw number 19 for the end plate

Additional information

Weight 0.1 kg
Material

Stainless steel, Steel end plates

Surface treatment

Polished stainless steel, End plate untreated

Reviews

There are no reviews yet.

Be the first to review “Cabinet rule 5181”

Your email address will not be published. Required fields are marked *


The reCAPTCHA verification period has expired. Please reload the page.

You may also need to

Related products

Single hook

Single hook in nickel-plated or untreated brass. Common during the period 1920 – 1965. Screw included.

EUR4.77EUR5.32

Kitchen shelf / pantry shelf shelf

Loose shelf in untreated pine with profiled edge at the bottom for our console ladder for kitchen shelf / pantry shelf or loose consoles. Based on a model from around 1905.

Shelf. Length 125 cm depth 28 cm. Thickness 2 cm. Unpainted.

Note! Brackets pictured are not included but can be purchased separately.

EUR71.07

Brick shelf

Tray shelf of the turn of the century type after Gysinge’s own model. For storage of serving trays, larger dishes, plates, etc. with a depth of up to 4.5 cm.

Untreated pine. Hand carved.

Tips! In the kitchen in Gysinge, Gästrikland, we also use it as a magazine rack.

EUR137.09

Kitchen stove rod brass 80 cm complete

Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in the kitchen, or in the bathroom. The model was common from the late 19th century until the 1930s.

MATERIAL Highest quality. Sand-cast brass. Polished shiny surface, but not lacquered. The brass darkens over time if not polished.

Length with knobs 80 cm

MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are carefully screwed into the wall. The hooks and brackets are then screwed onto the bar. Last of all, tighten the screws that prevent the bar from rolling.

TIP The bar can be shortened by sawing it off. It can also be connected to another pole if you want a longer version. In this case, you should use a so-called coupling sleeve and place a wall bracket over the joint.

Also available in nickel-plated version.

EUR274.64

Plate shelf

Shelf for placing dishes and plates after a model from the 18th century from Ovansjö parish in Gästrikland. Four shelves, three of which are intended for plates. The original shelf is painted in English red with green front edges on shelves and support strips. Well made carpentry work. Unpainted.

EUR421.36

Kitchen stove rod nickel-plated 155 cm complete

Kitchen stove rod with sturdy hooks for kitchen utensils, potholders, pots etc. Can also be used as a towel rack in the kitchen, or in the bathroom. The model was common from the late 1800s until the 1930s. Highest quality.

MATERIAL Made of solid brass or in nickel-plated version. Polished shiny surface, but not lacquered. The brass darkens over time if you do not polish it.

MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are carefully screwed into the wall. The hooks and brackets are then screwed onto the bar. Last of all, tighten the screws that prevent the bar from rolling.

The bar can be shortened by sawing it off. It can also be connected to another pole if a longer version is desired. In this case, a wall bracket should be placed over the joint.

EUR467.21

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop