SKU: 3031-193

Butterfly tassel 1900s brass

EUR10.93

Available in central stock
Fast facts

Additional information

Weight 0.025 kg

The 20th century damper tassels, which were attached to the damper chains and cords of the tiled stoves, are usually just turned, unlike the 19th century, which really looked like real tassels. We have now produced such a neat 1900s model with fine turning and attention to detail. The tassels are available in two versions, in brass for tiled stoves with brass doors and in nickel-plated brass for stoves with nickel-plated doors.

Unfired brass. Height 34 mm. Diameter 15 mm.

Description

The 20th century damper tassels, which were attached to the damper chains and cords of the tiled stoves, are usually just turned, unlike the 19th century, which really looked like real tassels. We have now produced such a neat 1900s model with fine turning and attention to detail. The tassels are available in two versions, in brass for tiled stoves with brass doors and in nickel-plated brass for stoves with nickel-plated doors.

Additional information

Weight 0.025 kg

Reviews

There are no reviews yet.

Be the first to review “Butterfly tassel 1900s brass”

Your email address will not be published. Required fields are marked *


The reCAPTCHA verification period has expired. Please reload the page.

You may also need to

Related products

Dam solution

Great for repairing glaze damage on tiled stoves etc.

Pond varnish is traditionally used on tiled stoves instead of linseed oil paint. This is because pond varnish does not turn yellow when the stove gets hot.

Prepare the duster solution in the same way as when making linseed oil paint. Stir the color pigments with the dust solution to form a porridge. Then dilute with additional solution to the appropriate consistency. If the kiln is really old and dull, you can dilute the colored duster solution with turpentine, so that it becomes less shiny. If the damage to the glaze consists only of small scratches or occasional chips, it is usually sufficient to paint over them with a dusting solution as above, and omit the plasterwork altogether. With the right color in the wounds, they will disappear to the eye anyway. Repeat the treatment if the paint did not cover enough the first time.

Tips! V years of experience is that Gysinge linseed oil paint does not yellow like others. Therefore, as an alternative to a dust solution, try painting the damage with Gysinge paint instead.

EUR13.57

Tiled stove joint

On tiled stoves, the gaps between the tiles and between the door frame and vents are usually grouted with a special stove grout. This grout is “softer” and more pliable than the tile grout normally used to grout wall tiles.

The reason why the joint is softer is that a tiled stove, when fired and cooled, shrinks and swells much more than wall and floor tiles.

Gysinge’s ready-mixed stove grout is based on a traditional mixture of chalk and titanium white. It is therefore white in color and is most suitable for white ovens. If you have a colored oven, you add pigment in the appropriate color and stir well before stirring it all out with water.

Instructions are included in the package. It is also available in PDF format under the heading Documents (at the Add to cart button).

Tips! The bucket contains enough for several ovens. Therefore, soak only the amount you need and save the rest for another time.

EUR13.57

Tassel tassels 19th century

Damper tassels were a common decorative detail on tiled stoves, wall vents, etc. from the mid-19th to the early 20th century. The tassel was locked by a knot at the end of the damper chain and served both as a pull knob and decoration. Gysinge’s own production.

EUR18.04

Spiral bud

Spiral knob of old standard model for iron stoves. chromed iron. The knob can be tightened to make it shorter, or lengthened by loosening the screw with a screwdriver.

EUR29.97

Stove clay 5 kg

Tiled stove clay for the renovation of tiled stoves where the firebox has weathered internally. The main reason for using clay is that it has the ability to expand and absorb and distribute the pressure generated by the heat. The properties of clay make the kiln durable and safe and prevent the tiles from bursting and leaking. Never use cement or concrete in a tiled stove as this makes renovation and removal/replacement difficult, or in some cases impossible.

Pack of 5 kg. Contains refractory clay, ready-mixed with sand (1 part clay flour and 3 parts sand). Normally sufficient for 2-3 tiled stoves. Only water needs to be added.

Instructions are included, but they are also available as a PDF under Documents (at the Add to cart button).

EUR34.16

Spiral valve nickel plated

Spiral valve intended for tiled stoves, ventilation in walls etc. Available in both polished brass and bright nickel-plated. Supplied on black plate but also suitable for 100 mm spiral pipes.

EUR59.12

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop