Oval key plate made of untreated iron plate of a model that has been common since the 18th century.
EUR4.07
Stove hook for wood stove and fireplace of traditional 1900s model. Adapted in dimensions to older stove model.
Chrome-plated iron. Length 38 cm.
EUR44.80
Loose shelf in untreated pine with profiled edge at the bottom for our console ladder for kitchen shelf / pantry shelf or loose consoles. Based on a model from around 1905.
Shelf. Length 125 cm depth 28 cm. Thickness 2 cm. Unpainted.
Note! Brackets pictured are not included but can be purchased separately.
EUR70.14
Kitchen shelf in simple Art Nouveau style after a model from around 1905. Originally made as a counter shelf with shelves of rib where household utensils were placed for drainage.
Pine, untreated. One shelf. Length 125 cm, width 28 cm, height (bracket) 340 mm, thickness 2 cm.
Additional freight.
EUR144.35
Console for our kitchen shelf in simple Art Nouveau style after the model from around 1905. Originally made as a counter shelf with shelves of rib, where you put pots etc for drainage.
EUR42.08
Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in bathrooms. The model was common from the late 1800s until the 1930s.
MATERIAL Made of solid brass or in nickel-plated version. Polished shiny surface, but not lacquered. The brass darkens over time if you do not polish it.
MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are screwed (carefully!) into the wall. The hooks and brackets are then screwed onto the pole. Last of all, you tighten the screws that prevent the bar from rolling.
TIP! The bar can be shortened by sawing it off. It can also be connected to another pole if you want a longer version. In this case, a wall bracket should be placed over the joint.
EUR415.85
Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in the kitchen, or in the bathroom. The model was common from the late 19th century until the 1930s. Highest quality.
MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are screwed (carefully!) into the wall. The hooks and brackets are then screwed onto the pole. Lastly, tighten the screws that prevent the bar from rolling.
The bar can be shortened by sawing it off. It can also be connected to another pole if a longer version is desired. In this case, a wall bracket should be placed over the joint and an additional coupling fitting should be purchased.
EUR302.72
Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in the kitchen, or in the bathroom. The model was common from the late 19th century until the 1930s.
MATERIAL Highest quality. Sand-cast brass. Polished shiny surface, but not lacquered. The brass darkens over time if not polished.
Length with knobs 80 cm
MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are carefully screwed into the wall. The hooks and brackets are then screwed onto the bar. Last of all, tighten the screws that prevent the bar from rolling.
TIP The bar can be shortened by sawing it off. It can also be connected to another pole if you want a longer version. In this case, you should use a so-called coupling sleeve and place a wall bracket over the joint.
Also available in nickel-plated version.
EUR271.05
Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in the kitchen, or in the bathroom.
MATERIAL Made of solid nickel-plated brass. Polished shiny surface, but not lacquered. The model was common from the late 1800s until the 1930s. Highest quality.
TIP The bar can be shortened by sawing it off. It can also be connected to another pole if you want a longer version. In that case, you should place another wall bracket over the joint and buy an extra coupling bracket.
EUR325.35
Kitchen stove rod with sturdy hooks for kitchen utensils, potholders, pots etc. Can also be used as a towel rack in the kitchen, or in the bathroom. The model was common from the late 1800s until the 1930s. Highest quality.
The bar can be shortened by sawing it off. It can also be connected to another pole if a longer version is desired. In this case, a wall bracket should be placed over the joint.
EUR461.10
Complete set of kitchen stove rail, brackets and hooks to attach above the stove for kitchen utensils, potholders etc. Can also be used as a towel rack in the kitchen, or in the bathroom. The model was common from the late 1800s until the 1930s.
MATERIAL Made of solid sand-cast brass or in nickel-plated version. The surface is polished, but not lacquered. The brass darkens over time if it is not polished.
MOUNTING The wall brackets have solid iron screws (diameter 3.5 mm) that are carefully (!) screwed into the wall. The hooks and brackets are then screwed onto the pole. Last of all, you tighten the screws that prevent the bar from rolling.
EUR298.20
EUR700.92
Cementbaserad fog för golvtegel och kalkstensgolv i en svagt grå kulör som motsvarar gammaldags kalkbruk. Användbar både inom- och utomhus. Blandas i kallt vatten till en degliknande konsistens och appliceras med gummispackel.
5kg. Cementfog. 0.5 – 1kg/kvm.
EUR15.84
EUR2.62
EUR520.38
Gränsfors Splitting Axes are, as the name suggests, made for splitting wood. The axes have a large and heavy head that is forged and ground to a concave shape with a relatively thin edge. The axes are made to cut along the wood fibers, unlike forest axes which are made to cut off the wood fibers. The concave shape of the splitting axes allows the edge to enter the wood easily and quickly, and then splits efficiently as the wider part pushes the wood apart. The unique shape also means that the axe head does not get stuck in the wood as easily as with a narrow axe head.
When splitting wood, the handle closest to the axe head is exposed to great stress as the handle can easily hit the wood being split. All Gränsfors splitting axes therefore come with a metal handle guard. To get a good grip on the axe, the handle is also grooved at the end.
All cleavers come with a vegetable-tanned leather blade guard and the Axe Book.
EUR181.00
Simple pine coat hanger based on a model from the early 1900s. The type is common from the 18th century onwards. Sturdy and useful for both clothes and other items. Usually unpainted. Three lengths, one with three knobs, one with six and one with ten. The buds are carved.
EUR83.71
Simple pine coat hanger based on an early 1900s model.
The type is common from the 18th century onwards. Sturdy and useful for both clothing and other purposes. Usually used to be unpainted.
Three lengths, one with three buds, one with six and one with ten.
EUR49.32
Coat rack in pine after a model from around 1870. Turned knobs. The board is edged all around with carnis profile. Sturdy and useful for clothes, work clothes, in kitchens for towels and aprons, etc. Was usually painted in the same color as the other carpentry in the room. Two lengths, one with four knobs and one with six.
EUR53.85
