Solid chair hinge with cone, left. Suitable for windows, cabinet and wardrobe doors.
Model from around 1860 to the middle of the 20th century. Typical cone-shaped spigots. Available in both left and right versions. High quality.
Height excl. knobs 66 mm, width unfolded 60 mm, Thickness 2 mm. Untreated iron.
Model: Left
Suitable screw: Screw 13
TIP! Here’s how to find out if you need right- or left-hinged hinges – Close and check! A closed door with hinges visible on the right is right-hinged. Similarly, a closed door with hinges visible on the left is left-hung.
EUR12.55
Solid chair hinge, right. Suitable for windows, cabinet and wardrobe doors.
Model: Right
Height excl. knobs 74 mm, width unfolded 60 mm, Thickness 2 mm. Untreated iron.
EUR13.45
Solid chair hinge with cone, right. Suitable for windows, cabinet and wardrobe doors.
Untreated iron. Screw not included.
Thickness 2.5 mm, height excl. studs 86 mm, width unfolded 74 mm.
Suitable screw: Screw 16
TIP! Here’s how to find out if you need right or left hinges – Close and check!
A closed door with hinges visible on the right is right-hinged. Similarly, a closed door with hinges visible on the left is left-hung.
Height excl. knobs 85 mm, width unfolded 74 mm, Thickness 2.5 mm. Untreated iron.
Solid chair hinge with acorn, right. Suitable for cabinet and wardrobe doors.
Model from around 1880-1920s. Acorn-shaped spigots typical of the period. Available in both left and right versions. High quality.
Height excl. knobs 98 mm, width unfolded 106 mm, thickness 2.5 mm. Untreated iron.
EUR15.26
Solid chair hinge with acorn, left. Suitable for cabinet and wardrobe doors.
Solid chair hinge for exterior and interior doors. The model was common from around 1860 to the middle of the 20th century. Period-typical pointed knobs. Available in both left and right versions. High quality.
Untreated iron. Height 98 mm (excluding knobs). Width unfolded 84 mm. Diameter of spigots 8 mm.
Suitable screw no. 16. (Screw not included.)
Solid chair hinge with ball, left. Suitable for cabinet and wardrobe doors.
Model from around 1880-1920s. Ball-shaped spigots typical of the period. Available in both left and right versions. High quality.
Height excluding knobs 98 mm, width unfolded 86 mm, thickness 2.5 mm. Untreated iron.
Hinge, right. Window fittings after a dominant model from the period 1850-1900. High quality. Hinge bars, hinges and corner brackets are available in two sizes, one for thicker arches and one for thinner ones.
To hang a sash that is on the right side of a window, you need a right-hand hinge and a left-hand hinge that you turn and 2 hinge pins.
EUR14.90
Hinge, left. Window fittings after a dominant model from the period 1850-1900. High quality. Hinge bars, hinges and corner brackets are available in two sizes, one for thicker arches and one for thinner ones.
To hang a sash that is on the left of a window, you need a left hinge and a right hinge that you turn around and 2 hinge pins.
EUR14.00
To hang a sash that is on the right of a window, you need a right-hand hinge and a left-hand hinge that you turn and 2 hinge pins.
Hinges with the same function as hinges with angled pins, but made of thinner material and with slightly narrower dimensions. Can also be used in combination with angled pins.
Hot-dip galvanized iron. Thickness 1mm. Diameter pin 2,5mm. Width unfolded 37mm.
Screw not included. Suitable screw no 19 or TFS 6×3/4″
EUR5.33
Height excluding knobs 70 mm, width unfolded 74 mm, thickness 2 mm. Untreated iron.
EUR14.45
Solid chair hinge, right to windows and wardrobe doors.
Model from around 1860 to the middle of the 20th century. Ball-shaped spigots typical of the period. Available in both left and right versions. High quality.
Untreated iron. Screw not included. Thickness 2mm, height excluding studs 74 mm, width unfolded 70 mm.
Solid chair hinge with cone, left. Suitable for cabinet and wardrobe doors.
Model from the period around 1880-1920s. Typical cone-shaped spigots. Available in both left and right versions. High quality.
Height excluding knobs 74 mm, width unfolded 70 mm, thickness 2 mm. Untreated iron.
Untreated iron. Screw not included. Thickness 2 mm, height excluding studs 74 mm, width unfolded 70 mm.
Leaf hinge with a loose angled pin, especially suitable for hanging interior windows that cannot be lifted off.
Dimensions and design similar to the most common interior window hinges at the turn of the century. Facilitates the work with old interior windows, as you can easily hang the arches, instead of screwing them.
Excellent to use in combination with our leaf bars and our folding boom fittings.
The angle clamp has a comfortable lifting angle and is easy to release if you want to remove the sashes.
Hot-dip galvanized iron. Thickness 1.5 mm, height 50 mm, width unfolded 50 mm, diameter pin 2.5 mm. Screw not included. (Suitable screw no 19 or TFS 5×3/4″)
EUR2.71
Hinges with punched bumps, right. Hand-forged window fittings of models that were common throughout the country in the 18th century. Well made hand forging.
EUR38.38
Spiral-twisted hinge stack. Hand-forged window fittings of models that were common throughout the country in the 18th century. Well made hand forging. Untreated iron.
EUR28.44
Hinged bar. Window fittings after a dominant model from the period 1850-1900. High quality. Hinge bars, hinges and corner brackets are available in two sizes, one for thicker arches and one for thinner ones.
EUR10.75
