Wall plate for ring line button with slot

SKU: 3041-73

Wall plate for ring line button with slot

EUR14.12

Available in central stock
Fast facts

Additional information

Weight 0.02 kg
Diameter

67 mm
Thickness

11 mm
Material

birch, untreated

Wall plate for ring main switch. The wooden plate provides stability for the electrical installation and at the same time serves as a decorative base for the ring circuit breaker. The plate is provided with countersunk screw holes and is mounted with the backside milled channel in vertical direction.

Diameter 67 mm, thickness 11 mm, with grooves. Birch, untreated.

Description

Wall plate for ring main switch. The wooden plate provides stability for the electrical installation and at the same time serves as a decorative base for the ring circuit breaker. The plate is provided with countersunk screw holes and is mounted with the backside milled channel in vertical direction.

Diameter 67 mm, thickness 11 mm, with grooves. Birch, untreated.

Additional information

Weight 0.02 kg
Diameter

67 mm
Thickness

11 mm
Material

birch, untreated

Reviews

There are no reviews yet.

Be the first to review “Wall plate for ring line button with slot”

Your email address will not be published. Required fields are marked *


The reCAPTCHA verification period has expired. Please reload the page.

You may also need to

Ring bell brass

EUR32.34

Add to cart

Ring bell nickel plated

EUR34.16

Add to cart

Ring bell black bakelite

EUR74.70

Add to cart

Related products

LED lamp clear E27 soft glow 2.3 W

Decorative LED lamp. As a worthy replacement for the beautiful old carbon wire lamp, we have a series of LED lamps (light-emitting diodes) in clear glass and visible filament. These lamps are both efficient and decorative and give off many hours of warm, yellow light. Given their energy efficiency, it could be said that LEDs waste light but are economical in terms of energy consumption.

LED filament lamps are a combination of modern technology and light bulb design that harks back to the design language of the early 1900s.

Clear glass. Not dimmable. E27 socket. 2,3W soft glow.

EUR8.65

Kulodosa porcelain round black

Smooth, round black porcelain ball box for surface mounting. Newly manufactured according to traditional model.

4 break walls on opposite sides.

ASSEMBLE AS FOLLOWS: Carefully tap out the break walls you intend to use. Screw the bottom of the box in place with suitable screws. Connect the cables. Screw the upper part in place with the appropriate screw.

EUR24.14

Kulodosa porcelain square white

Square junction box in white porcelain for surface mounting. Newly manufactured in a classic model.

4 break walls on opposite sides and 2 in corners.

ASSEMBLE AS FOLLOWS: Carefully tap out the break walls you intend to use. Screw the bottom of the box into place with the appropriate screws. Connect the cables. Screw on the cover with the appropriate screw.

EUR25.05

Dose dimmer kron LED

Chronic dimmer LD200KRON from Vadsbo. Together with a resilient push button, the dimmer creates a dimmer function.

Crown dimmer means two dimmers in the same enclosure. The product is designed to be installed in A or B boxes. Installed in an appliance or in a junction box, for example behind the switch or in the ceiling cup.

LD200KRON is specially adapted for dimming low energy and LED lamps. The dimmer is equipped with two control inputs and you can thus mix different loads on the outputs. The product can handle a load of up to 100VA per channel and has an adjustable minimum dimming level.

For example, the dimmer can be controlled by a resilient switch. See for example: 31-330-17-2, 31-330-27-2, 3041-46-91

EUR69.69

Room thermostat 16A black

2-pole electronic room thermostat from Schneider. Black, 16A. The thermostat is equipped with an LED that shows green = operation and red = active. 1°C sensitivity. Can be used in temperatures between +5°C to +30°C.

Frame included. Mounted in standard appliance box. If surface mounting is desired, the box is ordered separately.

The design is not identical to the THPG black backlit switch.

EUR148.04

Room thermostat 16A white

2-pole electronic room thermostat from Schneider. White, 16A. The thermostat is equipped with an LED that shows green = operation and red = active. 1°C sensitivity. Can be used in temperatures between +5°C to +30°C.

Frame included. Mounted in standard appliance box. If surface mounting is desired, the box is ordered separately.

The design is not identical to the THPG white backlit switch.

EUR148.04

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop