Stove clay 5 kg

SKU: 3021-3

Stove clay 5 kg

EUR34.16

Available in central stock
Fast facts

Additional information

Weight 5.2 kg
Intended for

repair of plaster and brick inside tiled stove
Packaging

5 kg
Contents

refractory clay, sand
Add yourself

water until smooth consistency
Note!

Not intended for the repair of brick or plaster in fireplaces.
Consumption

normally sufficient for 2-3 tiled stoves

Tiled stove clay for the renovation of tiled stoves where the firebox has weathered internally. The main reason for using clay is that it has the ability to expand and absorb and distribute the pressure generated by the heat. The properties of clay make the kiln durable and safe and prevent the tiles from bursting and leaking. Never use cement or concrete in a tiled stove as this makes renovation and removal/replacement difficult, or in some cases impossible.

Pack of 5 kg. Contains refractory clay, ready-mixed with sand (1 part clay flour and 3 parts sand). Normally sufficient for 2-3 tiled stoves. Only water needs to be added.

Instructions are included, but they are also available as a PDF under Documents (at the Add to cart button).

Description

Tiled stove clay for the renovation of tiled stoves where the firebox has weathered internally. The main reason for using clay is that it has the ability to expand and absorb and distribute the pressure generated by the heat. The properties of clay make the kiln durable and safe and prevent the tiles from bursting and leaking. Never use cement or concrete in a tiled stove as this makes renovation and removal/replacement difficult, or in some cases impossible.

Pack of 5 kg. Contains refractory clay, ready-mixed with sand (1 part clay flour and 3 parts sand). Normally sufficient for 2-3 tiled stoves. Only water needs to be added.

Instructions are included, but they are also available as a PDF under Documents (at the Add to cart button).

Additional information

Weight 5.2 kg
Intended for

repair of plaster and brick inside tiled stove
Packaging

5 kg
Contents

refractory clay, sand
Add yourself

water until smooth consistency
Note!

Not intended for the repair of brick or plaster in fireplaces.
Consumption

normally sufficient for 2-3 tiled stoves

Reviews

There are no reviews yet.

Be the first to review “Stove clay 5 kg”

Your email address will not be published. Required fields are marked *


The reCAPTCHA verification period has expired. Please reload the page.

Dokument

Instruction Tiled stove clay

You may also need to

Tiled stove joint

EUR13.57

Add to cart

Refractory clay mortar

EUR36.35

Add to cart

Spark grid for tiled stove

EUR76.98

Add to cart

Related products

Damper chain brass

Chains of the so-called patent model to be used for draft dampers on tiled stoves, spiral valves, etc. Thin, flexible and supple, yet strong and durable.

Can be mounted in two ways; Firstly, as a single length hanging arch. This method is suitable for spiral valves, for example. Partly hanging in two lengths with damper tassels as termination. This was common on the draught dampers of tiled stoves.

Normally, 150-200 cm of chain is needed depending on how high the stove is and how far down you want the chain to hang. The easiest way to shorten or cut the chain is with wire cutters.

Brass. Sold per meter. Width 3 mm.

EUR8.02

Damper chain nickel plated

Chains of the so-called patent model to be used for draft dampers on tiled stoves, spiral valves, etc. Thin, flexible and supple, yet strong and durable.

Can be mounted in two ways; Firstly, as a hanging arc in a single length. This method is suitable for spiral valves, for example. Partly hanging in two lengths with damper tassels as termination. This was common on the draught dampers of tiled stoves.

Normally, 150-200 cm of chain is needed depending on how high the stove is and how far down you want the chain to hang. The easiest way to shorten or cut the chain is with wire cutters.

Nickel-plated brass. Width 3 mm, price per meter.

EUR8.02

Dam solution

Great for repairing glaze damage on tiled stoves etc.

Pond varnish is traditionally used on tiled stoves instead of linseed oil paint. This is because pond varnish does not turn yellow when the stove gets hot.

Prepare the duster solution in the same way as when making linseed oil paint. Stir the color pigments with the dust solution to form a porridge. Then dilute with additional solution to the appropriate consistency. If the kiln is really old and dull, you can dilute the colored duster solution with turpentine, so that it becomes less shiny. If the damage to the glaze consists only of small scratches or occasional chips, it is usually sufficient to paint over them with a dusting solution as above, and omit the plasterwork altogether. With the right color in the wounds, they will disappear to the eye anyway. Repeat the treatment if the paint did not cover enough the first time.

Tips! V years of experience is that Gysinge linseed oil paint does not yellow like others. Therefore, as an alternative to a dust solution, try painting the damage with Gysinge paint instead.

EUR13.57

Spiral bud

Spiral knob of old standard model for iron stoves. chromed iron. The knob can be tightened to make it shorter, or lengthened by loosening the screw with a screwdriver.

EUR29.97

Brass spiral valve

Spiral valve intended for tiled stoves, ventilation in walls etc. Available in both polished brass and bright nickel-plated. Supplied on black plate but also suitable for 100 mm spiral pipes.

Diameter 104 mm butt (outer dimension).

EUR58.21

Spiral valve nickel plated

Spiral valve intended for tiled stoves, ventilation in walls etc. Available in both polished brass and bright nickel-plated. Supplied on black plate but also suitable for 100 mm spiral pipes.

EUR59.12

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop