Chains of the so-called patent model to be used for draft dampers on tiled stoves, spiral valves, etc. Thin, flexible and supple, yet strong and durable.

Can be mounted in two ways; Firstly, as a hanging arc in a single length. This method is suitable for spiral valves, for example. Partly hanging in two lengths with damper tassels as termination. This was common on the draught dampers of tiled stoves.

Normally, 150-200 cm of chain is needed depending on how high the stove is and how far down you want the chain to hang. The easiest way to shorten or cut the chain is with wire cutters.

Nickel-plated brass. Width 3 mm, price per meter.

Tassels from the 1910s. Tassels from the turn of the 20th century are usually only turned, unlike those from the 19th century, which really resembled real tassels.

We have produced an Art Nouveau model with fine turning and care in the details. The model for this damper is from Tyskbo Bergsmanssmedja in By parish Horndal.

Untreated brass. Height 60mm.

Tiled stove clay for the renovation of tiled stoves where the firebox has weathered internally. The main reason for using clay is that it has the ability to expand and absorb and distribute the pressure generated by the heat. The properties of clay make the kiln durable and safe and prevent the tiles from bursting and leaking. Never use cement or concrete in a tiled stove as this makes renovation and removal/replacement difficult, or in some cases impossible.

Pack of 5 kg. Contains refractory clay, ready-mixed with sand (1 part clay flour and 3 parts sand). Normally sufficient for 2-3 tiled stoves. Only water needs to be added.

Instructions are included, but they are also available as a PDF under Documents (at the Add to cart button).

Soot hatch on black plate support. Available in both polished brass and bright nickel-plated. Suitable as a soot hatch on tiled stoves, in walls, etc.