Many customers have asked for a special brush for shellacing twigs. The problem is that they don’t want to use ordinary, expensive brushes for this, because they have to be cleaned separately in methylated spirit and not in turpentine. And you want a long brush so that you can also reach the ceiling panels. The shellac brush is the answer to these wishes.

Black bristles. Wooden handle. Total length 32 cm.

For painting large surfaces, holds a lot of paint.

Chinese hog bristle 90 tops, straight top, untreated alder wood handle. Fully molded, no water pockets.

Chinese hog bristle 90 tops, straight top, untreated old wood handle. Used when painting small or confined spaces, where you want “access”.

ADVICE AND CARE INSTRUCTIONS:

To remove loose bristles, always soap-wash a new brush before use.

As the brushes contain pure natural bristles, it is essential that the bristles are not exposed to drying solvents, without re-greasing the bristles afterwards.

Before use: Oil the entire brush (with cooking oil, rapeseed oil, or similar) for a few days. Then soap wash out the brush.

After painting with water-based paints and “older” paints, e.g. egg oil tempera, glue paint, wash the brush thoroughly with soap and water.

After painting with oil-based paints, use a non-drying cleaner. Always finish with a soap wash.

It is important to smell the brush, properly washed out it only smells of soap or possibly pig bristles.

For longer painting breaks, lubricate the brush with soap and shape the brush so that it does not “bounce”, store the brush like that. You can also hang the brush in a container with oil and “forget about it”. This will keep the brush in good condition until the next season’s use.

ATTENTION! Linseed oil poses a risk of spontaneous combustion in rags and tangles!

For painting large surfaces, holds a lot of paint.

Chinese hog bristle 90 tops, straight top, untreated alder wood handle. Fully molded, no water pockets.

Pig bristles. Handle of alder. Thickness 65 mm.