Decorative LED lamp. As a worthy replacement for the beautiful old carbon wire lamp, we have a series of LED lamps (light-emitting diodes) in clear glass and visible filament. These lamps are both efficient and decorative and give off many hours of warm, yellow light. Given their energy efficiency, it could be said that LEDs waste light but are economical in terms of energy consumption.

LED filament lamps are a combination of modern technology and incandescent design that harks back to the design language of the early 1900s.

Clear glass. Dimmable. Socket E27. 4W soft glow.

Smooth, round black porcelain ball box for surface mounting. Newly manufactured according to traditional model.

4 break walls on opposite sides.

ASSEMBLE AS FOLLOWS: Carefully tap out the break walls you intend to use. Screw the bottom of the box in place with suitable screws. Connect the cables. Screw the upper part in place with the appropriate screw.

Square porcelain junction box for surface mounting. Newly manufactured in traditional model.

4 break walls on opposite sides and 2 in corners.

ASSEMBLE AS FOLLOWS: Carefully tap out the break walls you intend to use. Screw the bottom of the box into place with the appropriate screws. Connect the cables. Screw on the cover with the appropriate screw.

2-pole electronic room thermostat from Schneider. Black, 16A. The thermostat is equipped with an LED that shows green = operation and red = active. 1°C sensitivity. Can be used in temperatures between +5°C to +30°C.

Frame included. Mounted in standard appliance box. If surface mounting is desired, the box is ordered separately.

The design is not identical to the THPG black backlit switch.