Pin hammer

SKU: 3061-21

Pin hammer

EUR48.76

Available in central stock
Quick facts

Additional information

Weight 0.2 kg

Gysinge’s own special tool for driving pins into window frames. The strike of the hammer is square and trapezoidal so that, despite a difficult working angle, the pins can easily be driven in with force. The neck of the hammer is thin and long, so that it is possible to reach even the smallest crevices in a window frame.

Head of special steel, shaft of hickory.

Description

Gysinge’s own special tool for driving pins into window frames. The strike of the hammer is square and trapezoidal so that, despite a difficult working angle, the pins can easily be driven in with force. The neck of the hammer is thin and long, so that it is possible to reach even the smallest crevices in a window frame.

You may also need to

Related products

Pin wire 25 pcs

Pin wire in 25-pack

Pre-connected metal wire of the right hardness and with the right cut for glazing windows. Suitable for windows with generous putty seams.

Old-fashioned type pin wire. Best nailed with a tack hammer

 

EUR5.98

Glass cutter oil, 75 ml

Oil for our glass cutter

EUR6.90

Putty knife

Knife of the so-called Swedish model for puttying windows. Angled steel blade for the correct angle of the putty seam. Easy-to-grip wooden handle.

EUR21.99

Putty tongs

High-quality chisel with adjustable support wheel against the sash, which facilitates the removal of window putty and prevents damage to the glass.

EUR36.71

Glass cutter with oil container

Very suitable glass cutter for old uneven window glass. Brass handle that also serves as a container for cutting oil. Valve that regulates the amount of cutting oil. Articulated head. Cuts both straight and round cuts with a light pressure. Carbide wheels with extremely long life. Suitable for most glass thicknesses.

Tips!
Always hold the glass cutter steady in your hand, for example by always placing your index finger on the screw of the cutter head. Always cut in the same direction. Only cut clean glass panes. Listen for the sound of a cotton sheet being torn apart – the glass cutter will run perfectly.

EUR53.82

Pin apparatus, Frame master

The stapler for stapling window glass. Especially suitable for old window frames with thin, hand-blown window glass and shallow putty seams. The machine does not scratch the glass. The machine has a reversible magazine and can shoot pins that are 10 or 16 mm long.

Turning of magazines:

Unscrew the screw located at the bottom of the “nose” of the machine. Turn the magazine over and replace the screw.

Fletcher Frame master. Weight 0.5kg

EUR200.10

Related articles

There are no related articles for this product.