Black surface-mounted junction box from Schneider. High model for Renova 1-compartment appliances. For switches, wall sockets and dimmers. For vertical or horizontal mounting.

Decorative LED lamp. As a worthy replacement for the beautiful old carbon wire lamp, we have a series of LED lamps (light-emitting diodes) in clear glass and visible filament. These lamps are both efficient and decorative and give off many hours of warm, yellow light. Given their energy efficiency, it could be said that LEDs waste light but are economical in terms of energy consumption.

LED filament lamps are a combination of modern technology and incandescent design that harks back to the design language of the early 1900s.

Shape Edison or lantern bulb. Clear glass. Dimmable. E27 base. 3.6W soft glow.

Square porcelain junction box for surface mounting. Newly manufactured in traditional model.

4 break walls on opposite sides and 2 in corners.

ASSEMBLE AS FOLLOWS: Carefully tap out the break walls you intend to use. Screw the bottom of the box into place with the appropriate screws. Connect the cables. Screw on the cover with the appropriate screw.

Dimmer LED LDN200 from Vadsbo. Together with a spring-loaded push button, the dimmer creates a dimmer function.

The product does not require a zero when inserted and is therefore ideal for installation where the zero is missing in the appliance box or is difficult to access. The dimmer is mounted behind the switch or in the ceiling cup.

The dimmer is used for LED 0-200VA, 230V halogen and electronic transformers. The dimmer has a memory function and retains the last set light level when turning on and off. The product has an adjustable boost function and minimum and maximum dimming levels.

The dimming is controlled by one or more resilient pushbuttons. See for example: 31-330-17-2, 31-330-27-2, 3041-46-91