Key ring for large and many keys after old model from Gysinge.
Hand forged linseed oil fired special steel. Diameter 7 cm
EUR16.05
Oval key plate made of untreated iron plate of a model that has been common since the 18th century.
EUR4.13
Sliding bolt of solid brass for closing interior windows, cabinet doors etc. Model from the 19th century. Suitable counter fittings in the form of bracket or rule are available and purchased as a separate product.
EUR13.30
Traditional linseed oil putty based on linseed oil and chalk, kneaded to the desired consistency and applied with a putty knife.
Painting: Should always be painted over. Overpaint at the earliest after 3 to 4 weeks, but can also be overpainted with linseed oil paint immediately after puttying.
Meets the requirements for antiquarian renovation.
Instructions for use of linseed oil putty:
During application, the putty must not be exposed to high temperatures or solar heat, as it may dry too quickly with the risk of wrinkling the surface. Oil-based putty is affected differently depending on the type of paint. Samples are recommended before painting.
Keep the kit in a cool place before use.
Linseed oil putty is a perishable product, so what is not used can be placed in the freezer to be thawed the next time you need putty.
EUR8.16 – EUR32.92
Interior door lock intended for room doors after the middle of the 19th century, when there was a transition from surface-mounted chamber locks to recessed so-called mortise locks. The lock is a 3-keeper lock with 44 different key combinations and can be locked from both the outside and the inside. The lock has recess dimensions according to older standards. Therefore, it is often suitable from the late 1800s onwards. This lock is suitable for our prints and knobs, as well as accessories in the form of key plates, rosettes, long plates, etc.
Lock body and lock plate in galvanized steel. Supplied with two keys and strike plate. The latch bolt is reversible when dismantled, i.e. a right-hand lock can be turned into a left-hand lock and vice versa. Counter plate included. Equal locking with the same key for several locks can be specially ordered. Thorn depth 4.5cm.
Please note that the dimensional sketch is mirrored in relation to the product image.
EUR171.94
Interior door lock intended for room doors after the middle of the 19th century, when there was a transition from surface-mounted chamber locks to recessed so-called mortise locks. The lock is a 3-keeper lock with 44 different key combinations and can be locked from both the outside and inside.
The lock has recess dimensions according to older standards. Therefore, it is often suitable from the late 1800s onwards. For this lock, our prints and knobs fit, as well as accessories in the form of key plates, rosettes, long plates, etc.
Lock body and lock plate in galvanized steel. Supplied with two keys and strike plate. The latch bolt is reversible when dismantled, i.e. a right-hand lock can be turned into a left-hand lock and vice versa. Counter plate included. Equal locking with the same key for several locks can be specially ordered. Pin depth 4.5 cm
The locks are relatively similar throughout the ages. Most commonly, they were used in combination with a deadbolt or padlock on outbuilding and shed doors.
EUR29.80
Strong, wide, hand-forged lock spring for chamber locks and other locks from before the middle of the 19th century.
EUR23.84
Lock spring for chamber lock of turn of the century type 1900. Fits normal lock chests. Depending on the lock model, the spring may need to be bent or cut. Length 4.5 cm, width 6 mm
EUR9.17
Wooden lock plug, 2-pack. Many modern doors have large milled holes for standard modern handles and through-screw locks. Customers who want traditional fittings can therefore not choose them. But here is the solution. The wooden plug is used to plug oversized holes so that you can switch to traditional prints and key plates. The plug is fixed with glue in the empty holes.
EUR5.04
Hand-forged window fittings after a common model from 1800 to 1850. Well made hand forging from Gysinge.
EUR10.55
Hand-forged long hasp, part of our series of hand-forged window fittings. The model that was common throughout the country in the 18th century. Well made hand forging from Gysinge.
EUR11.92
Long hasp is part of the series Window fittings after 1850 to the early 1900s. Model from Gysinge. Available in two sizes. Untreated iron.
EUR2.93
Loose angle pin for hinges. The angle pin has a comfortable lifting angle and is easy to loosen if you want to remove the window sashes.
EUR1.65
Hand-forged marlin. Linseed oil fired iron. Length 35mm.
Hand-forged marlin. Linseed oil fired iron. 45 mm.
Hand-forged marlin.
Linseed oil fired iron. Length 60mm.
EUR4.59
Weatherstripping for outward opening windows in a solid classical model. Stepped opening and childproof. Nickel-plated. Screw TKFS N 3.5X16 mm for installation included. Template and simple installation instructions included.
The fitting is tested and approved childproof. Also available in untreated brass.
Tips! Sometimes one or more spacers are needed to get the right distance. See related products or ask in our shop.
EUR61.90
Weatherstripping for outward opening windows in a solid classical model. Stepwise opening and childproof.
Untreated brass. Screw for mounting and mounting template and instructions included. Also available in nickel-plated brass.
The fitting is tested and approved childproof.
EUR59.15
For scraping smooth surfaces such as facades etc.
Scraper blade in special steel. Designed to reduce power requirements and not damage the wood. The blades are sharpenable and the back of the blade is sharpened so as not to lose the unique profiles.Ergonomically designed handle.
The scraper is extra deep to easily collect the soft paint
Intended for use when scraping heated paint on wood using the Speedheater methodTM.
From the Speedeheater System.
EUR33.47
Pack of 5000pcs, 10 mm pins. Fits Frame master, Fletcher pin machine.
EUR48.14
Gysinge’s own special tool for driving pins into window frames. The strike of the hammer is square and trapezoidal so that, despite a difficult working angle, the pins can easily be driven in with force. The neck of the hammer is thin and long, so that it is possible to reach even the smallest crevices in a window frame.
Pin wire in 25-pack
Pre-connected metal wire of the right hardness and with the right cut for glazing windows. Suitable for windows with generous putty seams.
Old-fashioned type pin wire. Best nailed with a tack hammer
EUR5.96
Posthorn iron in brass
The posthorn iron is delivered including thrust washers, 8 mm square pin, wood screw and bushing to fit both older and modern locks.
For dimensions see picture
EUR201.28
