Door and gate handles

Model Lock Company No. 647

Time period 1905-1930

Rosettes included

Screw not included

Matching screw number 6

The 1930s was the breakthrough year for functional design in Sweden. A quest for simple and functional forms, honest and clear materials and, not least, simplified mass production paved the way for a whole range of new building materials.

On the fittings side, especially the door fittings changed. Nickel-plated surfaces were used instead of brass, which had to be polished to keep its shine. The handles were now made of easy-to-clean bakelite instead of wood. And the new long plates combined the two functions of rosette and key plate in a single plate.

In addition, the door locks were standardized so that all the prints fit all the locks and all long plates were made with the same distance between the print and the hole for the key.

The 1930s was the breakthrough year for functional design in Sweden. A quest for simple and functional forms, honest and clear materials and, not least, simplified mass production paved the way for a whole range of new building materials.

On the fittings side, especially the door fittings changed. Nickel-plated surfaces were used instead of brass, which had to be polished to keep its shine. The handles were now made of easy-to-clean bakelite instead of wood. And the new long plates combined the two functions of rosette and key plate in a single plate.

In addition, the door locks were standardized so that all the prints fit all the locks and all long plates were made with the same distance between the print and the hole for the key.

Door handle ai iron with hammered surface in a common model from the national romantic era in the early 1900s. The prints are available in several variants from this time, many of them are angular and uncomfortable, but this particular model is both linear and comfortable to hold.

The model was common mainly on exterior doors, but also appeared on interior doors. The prints were common until the 1950s and became especially popular on log cabins and holiday homes where you want a more rustic touch. The print is accompanied by a key plate, known as a long plate, in the same style, slightly curved and with a “hammered” surface.

Iron. Center distance between the hole of the push and the keyhole is 7.3 cm. The length of the bar is suitable for doors up to 8 cm thick, it is cut to the desired length. Length of pressure 10cm, keyhole 4,2x19cm, rod 0,8×0,8cm. Screw included!

The Villagatan door handle is a typical interior door fitting from the 1890-1920 era, a time when great care was taken with interiors, details and materials. Note, for example, the ebony-imitation wooden handle, the beaded rim that encompasses the handle as if it were a goldsmith’s work, and the well-cast end knob where the row of beads is repeated.

The pressure is adjustable and fits both thick and thin doors.

The Villagatan door handle is a typical interior door fitting from the 1890-1920 era, a time when great care was taken with interiors, details and materials. Note, for example, the ebony-imitation wooden handle, the beaded rim that encompasses the handle as if it were a goldsmith’s work, and the well-cast end knob where the row of beads is repeated.

The pressure is adjustable and fits both thick and thin doors.

Model: Tekaverken 400 N

Time period: 1945 – 1970

Key plate included.

Screw not included.

Matching screw number 19

Model Lock company No 659

Time period 1930-1940

Rosettes are included.

Screw not included.

Matching screw number 19

Model Låsbolaget No. 647 large

Time period 1905-1930

Screw not included.

Suitable screw number 6 or 7

Turned brass door knob. Can be used for both exterior doors and room doors. Primarily intended for double doors. Matching rosettes and key plates in brass are available for the knob.

Turned door knob of a model common on front doors mainly during the early 19th century. Primarily intended as a knob for double doors and front doors. Untreated iron, which does not need anti-corrosion treatment. The iron rusts the first time and then automatically gets a protective dark surface. Matching rosettes and key plates in iron are available for the knob.

Key plate with clapper of ordinary 19th century and early 20th century model. Fits our iron and brass door knobs and our lever handles, but is also useful when adding to older lever handles and knobs. With the new dimensions, our lock fittings also fit most modern locks with through screws, etc.

Door and gate handle, early 19th century. Hand forged linseed oil burned iron in the shape of a snake. Originally from a farm in Åsgarn, southern Dalarna. Mounted with two hand-forged nails in each bracket. Can be placed horizontally or vertically.

Door and gate handle, early 19th century. Hand forged linseed oil burned iron in the shape of a snake. Originally from a farm in Åsgarn, southern Dalarna. Mounted with two hand-forged nails in each bracket. Can be placed horizontally or vertically.

Hand forged linseed oil fired iron in the shape of a snake. Originally from a farm in Åsgarn, southern Dalarna. Assembled with two hand-forged nails in each bracket. Can be placed horizontally or vertically.

Key plate made of untreated iron plate of a model that has been common since the 17th century