Flexible and practical 19th century ash pan for iron stoves, fireplaces and tiled stoves.
Well made work in black plate and forging.
Hand-turned brass knob. Eyelet for hanging. Suitable in combination with our electric fork and ash rake with ring.
EUR100.41
Simple iron ash scraper for removing ashes from iron stoves, tiled stoves, etc. Forged end loop suitable for hanging on our small ice hook.
EUR30.72
19th century iron rake for removing ashes from tiled stoves, fireplaces and iron stoves.
Hand-turned brass knob with suspension ring.
EUR45.39
Spiral valve intended for tiled stoves, ventilation in walls etc. Available in both polished brass and bright nickel-plated. Supplied on black plate but also suitable for 100 mm spiral pipes.
Diameter 104 mm butt (outer dimension).
EUR58.60
The 20th century damper tassels, which were attached to the damper chains and cords of the tiled stoves, are usually just turned, unlike the 19th century, which really looked like real tassels. We have now produced such a neat 1900s model with fine turning and attention to detail. The tassels are available in two versions, in brass for tiled stoves with brass doors and in nickel-plated brass for stoves with nickel-plated doors.
EUR11.00
Nickel plated brass. Height 34mm, diameter 15mm
EUR10.91
Iron fishhook in a model that was common in the second half of the 19th century, until the beginning of the 20th century. Newly manufactured according to old craft traditions. Suitable for cast iron stoves and fireplaces of older models or equivalent newly manufactured according to older standards.
Stove hook, or stove hook, is a hand-forged tool designed to open stove doors and stove rings or to lift hot stove plates on a cast iron stove.
EUR26.13
Great for repairing glaze damage on tiled stoves etc.
Pond varnish is traditionally used on tiled stoves instead of linseed oil paint. This is because pond varnish does not turn yellow when the stove gets hot.
Prepare the duster solution in the same way as when making linseed oil paint. Stir the color pigments with the dust solution to form a porridge. Then dilute with additional solution to the appropriate consistency. If the kiln is really old and dull, you can dilute the colored duster solution with turpentine, so that it becomes less shiny. If the damage to the glaze consists only of small scratches or occasional chips, it is usually sufficient to paint over them with a dusting solution as above, and omit the plasterwork altogether. With the right color in the wounds, they will disappear to the eye anyway. Repeat the treatment if the paint did not cover enough the first time.
Tips! V years of experience is that Gysinge linseed oil paint does not yellow like others. Therefore, as an alternative to a dust solution, try painting the damage with Gysinge paint instead.
EUR13.66
Chains of the so-called patent model to be used for draft dampers on tiled stoves, spiral valves, etc. Thin, flexible and supple, yet strong and durable.
Can be mounted in two ways; Firstly, as a single length hanging arch. This method is suitable for spiral valves, for example. Partly hanging in two lengths with damper tassels as termination. This was common on the draught dampers of tiled stoves.
Normally, 150-200 cm of chain is needed depending on how high the stove is and how far down you want the chain to hang. The easiest way to shorten or cut the chain is with wire cutters.
Brass. Sold per meter. Width 3 mm.
EUR8.07
Can be mounted in two ways; Firstly, as a hanging arc in a single length. This method is suitable for spiral valves, for example. Partly hanging in two lengths with damper tassels as termination. This was common on the draught dampers of tiled stoves.
Nickel-plated brass. Width 3 mm, price per meter.
Tassels from the 1910s. Tassels from the turn of the 20th century are usually only turned, unlike those from the 19th century, which really resembled real tassels.
We have produced an Art Nouveau model with fine turning and care in the details. The model for this damper is from Tyskbo Bergsmanssmedja in By parish Horndal.
Untreated brass. Height 60mm.
EUR31.64
Hand-forged fire dog with a candle head. Fire dogs were common in fireplaces in the past. They were used to put up the wood and thus get a better fire on the fire. Since we in Sweden often replaced the fireplaces with tiled stoves already in the 18th century, it is unusual with preserved fire dogs here. On the continent, however, and especially in countries such as France and England, open fireplaces have continued and fire dogs are therefore still very common.
Our Swedish fire dog is forged after a model from around 1800. The unique thing about the model is that it has a “candle head”, i.e. a holder for candles, which could be lit and create a cozy atmosphere even though the fire was not lit. This little detail makes our fire dog extra decorative when it stands guard and shines in the otherwise only sooty and black hole of the fireplace. The candle head is also very practical for burning candle butts.
Our fire dog can, depending on the size of the stove, be used alone, or placed in pairs. It is also very decorative just as a stand-alone candlestick. The forging is rough and rustic in character, more peasant forging than fine forging, but of the highest Swedish class in every detail.
Hand forged, linseed oil fired iron. Height 265mm, length 365mm, width 245mm. Weight 1.5kg
EUR215.04
Ash shovel, ash rake and poker in a complete set and three small ice hooks.
Linseed oil fired wrought iron. Brass knob. Fire fork 85cm, ash shovel 60cm, ash rake 65cm. Width ash shovel 8.5cm, ash rake 9.5cm
EUR228.79
Iron model that became common in the 19th century and was produced well into the 20th century. Brass end knob. Eye for hanging.
EUR75.65
Stove hook for wood stove and fireplace of traditional 1900s model. Adapted in dimensions to older stove model.
Chrome-plated iron. Length 38 cm.
Genuine old-fashioned Swedish spissvärta made from traditional old-fashioned recipes and contains no solvents, only natural ingredients.
When you want to freshen up and restore the luster of your old rusty iron stove or other indoor iron.
EUR11.83
Pitcher hole for tiled stove intended to heat plates or keep soup and drinks warm in winter.
Especially in the dining room’s tiled stoves, there used to be a so-called pot hole on the chest of the stove.
The Gysinge pitcher hole is an accessory for our handmade tiled stoves. Of course, you can buy just a pitcher hole. A pitcher hole with a candle or flower in it makes an adorable installation on a shelf or cabinet.
EUR788.62
Pitcher hole for a tiled stove intended to heat plates or keep soup and drinks warm in winter. Hence, the most common location was in the dining room.
The Gysinge pitcher hole is an accessory for our handmade tiled stoves. Of course you can buy only one pot hole.
Made by hand from white-firing clay. Hand-glazed. The color schemes of the potholes also show the different colors our 18th century tiled stove can be ordered in. Width 30 cm, height 45 cm.
Made by hand from white-firing clay. Hand-glazed. The color schemes of the potholes also show the different colors our 18th century tiled stove can be ordered in. Width 30 cm, height 4 5cm.
Pitcher hole for tiled stove intended for heating plates or keeping soup and drinks warm in winter.
In the old days, dining room stoves used to have a so-called pot hole on the chest of the stove.
Made by hand from white-firing clay. Hand-glazed. The color schemes of the potholes also show the different colors our 18th century tiled stove can be ordered in. Height 45cm, width 30cm.
Clay and iron filings for insulating iron stoves. The kit is enough for a large iron stove and only water needs to be added. 2 bags of clay, 1 bag of iron filings. Total about 5 kg.
Why is refractory mortar needed for iron stoves?
In iron cookers, the roof of the oven section needs to be covered with clay mortar to provide more even heat in the oven and to prevent the heat from rising and falling too quickly when firing. The mortar is also necessary to prevent the stove from cracking if the fire is too hot. In old iron stoves, you can usually only see the remains of this insulation in the form of a layer of gravel on top of the stove. Refractory clay mortar should only be laid on top of the stove roof.
Contains clay mixture (1 part clay flour and 3 parts sand) and iron filings. Instructions are included. It is also available as a PDF under the heading Documents (at the Add to cart button).
EUR36.59
Soot hatch on black plate support. Available in both polished brass and bright nickel-plated. Suitable as a soot hatch on tiled stoves, in walls, etc.
EUR49.98
EUR52.73
Gysinge’s own spark grid for both flat and round tile stoves. Fits most stoves made after 1870 due to its flexible width. Prevents sparks from the fire from spreading into the room and at the same time dampens the draft in the oven. With a spark grate, the tiled stove can be fired with the doors open.
(The environmental image shows an earlier version, the construction is the same but we have refined the wooden handles).
EUR77.49
