Switch

Three-compartment frame in black porcelain that fits Fontini’s recessed switches and sockets.

ATTENTION! Three switches or sockets combined with this frame require three separate wall boxes.

Three-compartment frame in untreated beech to fit Fontini recessed switches and sockets.

ATTENTION! Three switches or sockets combined with this frame require three separate wall boxes.

Three-compartment frame in untreated beech to fit Fontini recessed switches and sockets.

The frame can be painted in any color.

ATTENTION! Three switches or sockets combined with this frame require three separate wall boxes.

Three-compartment frame in white porcelain suitable for Fontini recessed switches and sockets.

ATTENTION! Three switches or sockets combined with this frame require three separate wall boxes.

Round frame in untreated beech that fits Fontini’s recessed switches and sockets.

The frame can be painted in any color.

Round frame in white porcelain that fits Fontini recessed switches and sockets.

Insulating plastic base plate that can be used as extra fire protection if surface-mounted switches or sockets are mounted on flammable material such as paper wallpaper or wood paneling.

Suitable for surface-mounted switches and sockets from Fontini.

Black porcelain knob in classic design that fits Fontini’s recessed and surface-mounted switches.

The knobs are sold individually.

Knob in untreated beech in a classic design that fits Fontini’s recessed and surface-mounted switches.

The knobs are sold individually.

Single porcelain ring for mounting a recessed central insert 82 mm.

Porcelain frame for data and telephony sockets.

Dimmer switch with step switch function made of white porcelain for wall mounting. Press for on/off and turn to adjust brightness. This dimmer works with dimmable LED lamps and regular incandescent and low energy lamps. Also works with HV-Halogen and NV-Halogen with magnetic transformer. It does not work for NV-Halogen with electronic transformer.

Material: Insert, dimmer switch and scope are white porcelain

Size: Diameter 82 mm

Connected power: 7-110 W/VA and 3-35 W LED

Operating voltage: 230 V/50 Hz

Short circuit/overload protection: Yes, with fuse

Classic surface-mounted switch in black porcelain with brass knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to turn on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate can be used as additional fire protection.

Classic surface-mounted switch in black porcelain with black porcelain knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to turn on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate should be used as additional fire protection.

Classic surface-mounted switch in black porcelain with dark stained wooden knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to switch on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate should be used as additional fire protection.

Classic surface-mounted switch in black porcelain with untreated wooden knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to switch on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate can be used as additional fire protection.