Electricity and lighting

Electric lighting only came into being at the beginning of the 20th century. It wasn't until then that outdoor lights appeared on ordinary houses.
Color
Color

Shoemaker lamp large green shade black cord

The cobbler’s lamp was one of the first indoor electric light fixtures.

The model became common as ceiling lighting in all rooms in simpler homes from the 1910s onwards, however in wealthier environments it became the standard luminaire for less lavish rooms, such as hallways, kitchens and maids’ rooms.

The lamp provides nice and soft spot lighting and fits nicely over the dining table, preferably several in a row.

All metal parts are made of heavy, polished, unlacquered brass. The shade is made of hand-blown green opal glass with white inside.

A specially designed cable strain relief relieves the cable so that it does not carry the entire weight of the luminaire. An optional porcelain ceiling bracket with a wooden base plate is available for a contemporary ceiling connection.

Shade of hand-blown green opal glass with white inside. Diameter 25 cm. Lamp holder in unpainted polished brass with ceramic base. Light source for E27 base. 2 m black twisted textile covered cable (3-wire, grounded) included. Plug not included.

EUR180.15

Shoemaker lamp large green shade white cord

The cobbler’s lamp was one of the first indoor electric light fixtures.

The model became common as ceiling lighting in all rooms in simpler homes from the 1910s onwards, however in wealthier environments it became the standard luminaire for less lavish rooms, such as hallways, kitchens and maids’ rooms.

The lamp provides nice spot lighting and fits just as well alone over a dining table as to hang several in a row.

All metal parts are made of heavy, polished, unlacquered brass. The shade is green with white inside and is made of hand-blown opal glass.

A specially designed cable strain relief relieves the cable so that it does not carry the entire weight of the luminaire. As an extra accessory, for a contemporary ceiling connection, a porcelain ceiling bracket with a wooden base plate is available, both with and without grooves.

Shade of hand-blown green opal glass with white inside. Diameter 25 cm. Lamp holder in unpainted polished brass with ceramic base. Light source for E27 base. 2 m white twisted textile covered cable (3-wire, earth) included. Plug not included.

EUR180.15

Shoemaker lamp large white shade black cord

The cobbler’s lamp was, alongside the simple porcelain lamp holders, the first real indoor luminaire for electric light.

The model became common as ceiling lighting in all rooms in simpler homes from the 1910s onwards, however in wealthier environments it became the standard luminaire for less lavish rooms, such as hallways, kitchens and maids’ rooms.

All sheet metal parts are made of heavy, polished, unlacquered brass. The screen is made of opal glass.

A specially designed black plastic cable strain relief relieves the cable so that it does not carry the entire weight of the luminaire. As an extra accessory, for a contemporary ceiling connection, there is a porcelain ceiling bracket with a wooden base plate that is purchased separately (item no. 3041-64).

Opal glass shade, diameter 25 cm. Lamp holder untreated brass. Twisted black textile cord 2 m included. Plug not included.

EUR174.73

Shoemaker lamp large white shade white cord

The cobbler’s lamp was, alongside the simple porcelain lamp holders, the first real indoor luminaire for electric light.

The model became common as ceiling lighting in all rooms in simpler homes from the 1910s onwards, however in wealthier environments it became the standard luminaire for less lavish rooms, such as hallways, kitchens and maids’ rooms.

All sheet metal parts are made of heavy, polished, unlacquered brass. The screen is made of opal glass.

A specially designed cable strain relief relieves the cable so that it does not carry the entire weight of the luminaire. A porcelain ceiling bracket with a wooden base plate (item no. 3041-64) is available as an optional accessory for a contemporary ceiling connection.

Shade of hand-blown white opal glass, diameter 25 cm. Lamp holder untreated brass. Twisted white three-wire (grounded) textile cord 2 m included. Plug not included.

EUR174.73

Shoemaker lamp small green shade black cord

The cobbler’s lamp was one of the first indoor electric light fixtures.

The model became common as ceiling lighting in all rooms in simpler homes from the 1910s onwards, however in wealthier environments it became the standard luminaire for less lavish rooms, such as hallways, kitchens and maids’ rooms.

The lamp provides nice and soft spot lighting and is suitable for smaller spaces such as windows.

All sheet metal parts are made of heavy, polished, unlacquered brass. The screen is made of opal glass.

A specially designed cable strain relief relieves the cable so that it does not carry the entire weight of the luminaire. A porcelain ceiling bracket with a wooden base plate is available as an optional accessory for a contemporary ceiling connection.

Shade of hand-blown green opal glass with white inside. Diameter 20 cm. Lamp holder in unpainted polished brass with ceramic base. Light source for E27 base. 2 m twisted black textile cord, 3-wire (grounded) included. Plug not included.

EUR173.83

Shoemaker lamp small green shade white cord

The cobbler’s lamp was one of the first indoor electric light fixtures.

The model became common as ceiling lighting in all rooms in simpler homes from the 1910s onwards, however in wealthier environments it became the standard luminaire for less lavish rooms, such as hallways, kitchens and maids’ rooms.

The lamp provides nice and soft spot lighting and is suitable for smaller spaces such as windows.

All metal parts are made of heavy, polished, unlacquered brass. The shade is green with white inside and is made of hand-blown opal glass.

A specially designed cable strain relief relieves the cable so that it does not carry the entire weight of the luminaire. As an extra accessory, for a contemporary ceiling connection, a porcelain ceiling bracket with a wooden base plate is available, both with and without grooves.

EUR173.83

Shoemaker lamp small white shade black cord

The cobbler’s lamp was, alongside the simple porcelain lamp holders, the first real indoor luminaire for electric light.

The model became common as ceiling lighting in all rooms in simpler homes from the 1910s onwards, however in wealthier environments it became the standard luminaire for less lavish rooms, such as hallways, kitchens and maids’ rooms.

All sheet metal parts are made of heavy, polished, unlacquered brass. The screen is made of opal glass.

A specially designed black plastic cable strain relief relieves the cable so that it does not carry the entire weight of the luminaire. A porcelain ceiling bracket with a wooden base plate (item no. 3041-64) is available as an optional accessory for a contemporary ceiling connection.

Hand-blown opal glass shade, diameter 20 cm. Lamp holder in untreated brass with ceramic base for E27. Twisted three-core (grounded) textile cord 2 m, black, included.

Plug not included.

EUR166.60

Shoemaker lamp small white shade white cord

The cobbler’s lamp was, alongside the simple porcelain lamp holders, the first real indoor luminaire for electric light.

The model became common as ceiling lighting in all rooms in simpler homes from the 1910s onwards, however in wealthier environments it became the standard luminaire for less lavish rooms, such as hallways, kitchens and maids’ rooms.

All sheet metal parts are made of heavy, polished, unlacquered brass. The screen is made of opal glass.

A specially designed black plastic cable strain relief relieves the cable so that it does not carry the entire weight of the luminaire. A porcelain ceiling bracket with a wooden base plate (item no. 3041-64) is available as an optional accessory for a contemporary ceiling connection.

EUR166.60

Silicone gasket for porcelain lamp

Silicone gasket for indoor and outdoor porcelain lamp and small wind lamp. The gasket is placed between the porcelain base and the mouth-blown glass body.

EUR2.26

Single LED can dimmer

Dimmer LED LDN200 from Vadsbo. Together with a spring-loaded push button, the dimmer creates a dimmer function.

The product does not require a zero when inserted and is therefore ideal for installation where the zero is missing in the appliance box or is difficult to access. The dimmer is mounted behind the switch or in the ceiling cup.

The dimmer is used for LED 0-200VA, 230V halogen and electronic transformers. The dimmer has a memory function and retains the last set light level when turning on and off. The product has an adjustable boost function and minimum and maximum dimming levels.

The dimming is controlled by one or more resilient pushbuttons. See for example: 31-330-17-2, 31-330-27-2, 3041-46-91

EUR55.53

Socket Black plastic insert

Classic electrical outlet in black plastic without frame in a design that was common in Europe in the first half of the 20th century.

The socket is earthed and has a cap protection.

Frame sold separately.

EUR19.87

Socket white plastic insert

Classic recessed electrical outlet in white plastic without frame in a design that was common in Europe in the first half of the 20th century.

The socket outlet is earthed and has a pin protection.

Plastic insert only. Frame sold separately.

EUR17.61

Socket white porcelain insert

Classic recessed electrical outlet in white porcelain without frame in a design that was common in Europe during the first half of the 20th century.

The socket is earthed and has a cap. Insert only. Frame sold separately.

EUR27.09

Socket white porcelain plastic insert with frame

Classic recessed socket with white plastic insert and white porcelain frame in a design that was common in Europe during the first half of the 20th century.

The socket outlet is earthed and has a pin protection.

ATTENTION! Some shade difference between plastic insert and frame.

EUR41.09

Socket white porcelain with frame

Classic recessed electrical outlet in white porcelain with a white porcelain frame in a design that was common in Europe during the first half of the 20th century.

The outlet is earthed and has a cap protection.

EUR50.57

Stair switch black porcelain black knob

Classic surface-mounted switch in black porcelain with black porcelain knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to turn on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate can be used as additional fire protection.

EUR50.57

Stair switch black porcelain brass knob

Classic surface-mounted switch in black porcelain with brass knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to turn on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate can be used as additional fire protection.

EUR60.95

Stair switch black porcelain classic knob

Classic surface-mounted switch in black porcelain with black porcelain knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to turn on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate should be used as additional fire protection.

EUR50.57

Stair switch black porcelain dark stain knob

Classic surface-mounted switch in black porcelain with dark stained wooden knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to switch on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate should be used as additional fire protection.

EUR49.21

Stair switch black porcelain natural color knob

Classic surface-mounted switch in black porcelain with untreated wooden knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to switch on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate can be used as additional fire protection.

EUR49.21

Stair switch insert black porcelain

Classic recessed switch in black porcelain without knob and frame in a design that was common in Europe in the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to switch on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

Combine with optional knob and frame sold separately. See related products.

EUR41.54

Stair switch insert white porcelain

Classic recessed switch in white porcelain without knob and frame in a design that was common in Europe in the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to switch on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

Combine with optional knob and frame sold separately. See related products.

EUR36.12

Stair switch white porcelain dark stain knob

Classic surface mounted switch in white porcelain with dark stained wooden knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to switch on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate can be used as additional fire protection.

EUR44.25

Stair switch white porcelain natural color knob

Classic surface-mounted switch in white porcelain with untreated wooden knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to switch on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate can be used as additional fire protection.

EUR44.25

Related articles

It seems we can't find what you're looking for.

Please leave a comment what you think about our new webshop