Electricity and lighting

Electric lighting only came into being at the beginning of the 20th century. It wasn't until then that outdoor lights appeared on ordinary houses.
Color
Color

Cord rack with switch ungrounded 2.7m

Black cord rack. 270 cm. Textile-covered cable (2-wire, ungrounded) with switch and plug. The switch is mounted to be approximately 30 cm from the lamp.

EUR26.87

Cord switch black

Switches for table lamps, bedside lamps etc.

EUR6.29

Cross coupler black porcelain

Classic surface-mounted switch in black porcelain without a knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called cross function, which means that it should only be used if more than two switches are to control the same light source from different locations in a room, staircase or corridor. The cross-function switch is then mounted between two staircase switches.

If an ordinary switch is required to turn a light source on and off, or if two switches are connected to the same light source, a step switch should be selected instead.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate should be used as additional fire protection.

Combine the switch with the optional knob sold separately. See related products below.

EUR52.38

Cross coupler insert black porcelain

Classic recessed switch in black porcelain without knob and frame in a design that was common in Europe in the first half of the 20th century.

This switch has a so-called cross function, which means that it should only be used if more than two switches are to control the same light source from different locations in a room, staircase or corridor. The cross-function switch is then mounted between two staircase switches.

If an ordinary switch is required to turn a light source on and off, or if two switches are connected to the same light source, a step switch should be selected instead.

Combine the switch with the optional knob and frame sold separately. See related products below.

EUR54.66

Cross coupler insert white porcelain

Classic recessed switch in white porcelain without knob and frame in a design that was common in Europe in the first half of the 20th century.

This switch has a so-called cross function, which means that it should only be used if more than two switches are to control the same light source from different locations in a room, staircase or corridor. The cross-function switch is then mounted between two staircase switches.

If an ordinary switch is required to turn a light source on and off, or if two switches are connected to the same light source, a step switch should be selected instead.

Combine the switch with optional knob and frame sold separately. See related products below.

EUR48.28

Cross coupler white porcelain

Classic surface-mounted switch in white porcelain without a knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called cross function, which means that it should only be used if more than two switches are to control the same light source from different locations in a room, staircase or corridor. The cross-function switch is then mounted between two staircase switches.

If an ordinary switch is required to turn a light source on and off, or if two switches are connected to the same light source, a step switch should be selected instead.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall outlet in combination with one of Fontini’s base plates.

For surface mounting on wooden panels or other flammable material, an insulating plastic base plate can be used as additional fire protection.

Combine the switch with the optional knob sold separately. See related products below.

EUR50.56

Crown switch insert black porcelain

Classic recessed switch in black porcelain without knob and frame in a design that was common in Europe in the first half of the 20th century.

This switch has a so-called crown function, which means that it is used to control two separate light sources. The different positions of the knob make it possible to choose whether both light sources should be lit at the same time or only one.

Four positions of the knob:
1. Both light sources off
2. Light source A on
3. Both light sources on
4. Light source B on

Combine with optional knob and frame sold separately. See related products.

EUR49.19

Crown switch insert white porcelain

Classic recessed switch in white porcelain without knob and frame in a design that was common in Europe in the first half of the 20th century.

This switch has a so-called crown function, which means that it is used to control two separate light sources. The different positions of the knob make it possible to choose whether both light sources should be lit at the same time or only one.

Four positions of the knob:
1. Both light sources off
2. Light source A on
3. Both light sources on
4. Light source B on

Combine with optional knob and frame sold separately. See related products.

EUR44.64

Cutlery holder brass

Solid brass claw-shaped shield holder, decorated with a rope rod and fitted with three adjustable screws to hold the shield.

EUR54.20

Data socket bakelite insert

Bakelite network socket for two RJ45. Fits with bakelite cover from THPG

EUR47.83

Data socket insert porcelain

Porcelain network socket for two RJ45’s. Combined with porcelain cover for network socket.

EUR46.92

Dimmer double twist insert black porcelain

Recessed rebounding double dimmer in black porcelain without frame and knob in a design that was common in Europe in the first half of the 20th century.

The double dimmer is bi-directional and has a so-called crown function, which means that it is used to dim two separate light sources.

Combine the switch with the optional frame and knob sold separately. See related products.

Please note! Frame, knob and dimmer are purchased separately.

EUR56.48

Dimmer double twist insert white porcelain

Recessed recessed double dimmer in white porcelain without frame and knob in a design that was common in Europe in the first half of the 20th century.

The double dimmer is bi-directional and has a so-called crown function, which means that it is used to dim two separate light sources.

The can dimmer, sold separately, is placed in appliance boxes in the wall. Combine the switch with optional frame and knob sold separately. See related products.

EUR49.65

Dimmer insert for LED 4-100W black porcelain

Dimmer with step function in black porcelain intended for wall mounting. The button is pressed to turn on/off a light source and turned to regulate the brightness.

Works with dimmable LED lamps, ordinary incandescent lamps and low-energy lamps. Together with an electronic transformer, it also works with NV halogen.

Insert only. Combine with optional frame for recessed inserts sold separately.

EUR138.47

Dimmer insert for LED 4-100W white porcelain

Dimmer with step function in white porcelain intended for wall mounting. The button is pressed to turn on/off a light source and turned to regulate the brightness.

Works with dimmable LED lamps, ordinary incandescent lamps and low-energy lamps. Together with an electronic transformer, it also works with NV halogen.

Insert only. Combine with optional frame sold separately.

EUR124.35

Dimmer LED Bakelite

Dimmer switch with step switch function made of black bakelite for wall mounting. Press for on/off and turn to adjust brightness. This dimmer works with dimmable LED lamps and regular incandescent and low energy lamps. Also works with HV-Halogen and NV-Halogen with magnetic transformer. It does not work for NV-Halogen with electronic transformer.

Material: Insert, dimmer switch and scope are made of black bakelite

Size: Diameter 82 mm

Connection power: 7-110 W/VA and 3-35 W LED

Operating voltage: 230 V/50 Hz

Short circuit/overload protection: Yes, with fuse

EUR108.41

Dimmer LED insert bakelite

Dimmer switch with step switch function made of black bakelite for wall mounting. Press for on/off and turn to adjust the brightness.

Works with dimmable LED lamps and standard incandescent and low-energy lamps. Also works with HV-Halogen and NV-Halogen with magnetic transformer. It does not work for NV-Halogen with electronic transformer.

EUR99.30

Dimmer LED insert porcelain

Insert for dimmer switch in white porcelain for recessed mounting. Works with both dimmable LED lamps, ordinary incandescent lamps and low-energy lamps.

Porcelain ring not included, purchased separately.

EUR113.88

Dimmer with frame LED 4-100W black porcelain

Dimmer with step function in black porcelain with black porcelain frame intended for wall mounting. The button is pressed to turn on/off a light source and turned to regulate the brightness.

Works with dimmable LED lamps, ordinary incandescent lamps and low-energy lamps. Together with an electronic transformer, it also works with NV halogen.

EUR163.52

Dimmer with frame LED 4-100W white porcelain

Dimmer with step function in white porcelain with white porcelain frame intended for wall mounting. The button is pressed to turn on/off a light source and turned to regulate the brightness.

Works with dimmable LED lamps, ordinary incandescent lamps and low-energy lamps. Together with an electronic transformer, it also works with NV halogen.

EUR148.04

Dose dimmer kron LED

Chronic dimmer LD200KRON from Vadsbo. Together with a resilient push button, the dimmer creates a dimmer function.

Crown dimmer means two dimmers in the same enclosure. The product is designed to be installed in A or B boxes. Installed in an appliance or in a junction box, for example behind the switch or in the ceiling cup.

LD200KRON is specially adapted for dimming low energy and LED lamps. The dimmer is equipped with two control inputs and you can thus mix different loads on the outputs. The product can handle a load of up to 100VA per channel and has an adjustable minimum dimming level.

For example, the dimmer can be controlled by a resilient switch. See for example: 31-330-17-2, 31-330-27-2, 3041-46-91

EUR69.69

Double dimmer black porcelain black knob

Surface-mounted rebounding double dimmer in black porcelain with knob in a design that was common in Europe during the first half of the 20th century.

The double dimmer has a so-called crown function, which means that it is used to dim two separate light sources. The supplied dimmer switch is placed in appliance boxes in the wall.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate should be used as additional fire protection.

EUR136.19

Double dimmer black porcelain brass knob

Surface-mounted spring-loaded double dimmer in black porcelain with brass knob, a design that was common in Europe during the first half of the 20th century.

The double dimmer has a so-called crown function, which means that it is used to dim two separate light sources. The supplied dimmer switch is placed in appliance boxes in the wall.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate should be used as additional fire protection.

EUR146.67

Related articles

It seems we can't find what you're looking for.

Please leave a comment what you think about our new webshop