Electricity and lighting

Electric lighting only came into being at the beginning of the 20th century. It wasn't until then that outdoor lights appeared on ordinary houses.
Color
Color

Box Renova UP high white

Black surface-mounted junction box from Schneider. High model for Renova 1-compartment appliances. For switches, wall sockets and dimmers. For vertical or horizontal mounting.

EUR13.57

Branch light small

Traditional hand molded pillar candle. When the candle mass is hot, the branch candle is molded and shaped by hand. The long burning time and beautiful flame are the result of the right mix of stearin, paraffin, wax and wick yarn.

Comes in a nice white cardboard box from STHLMS Ljusstöperi with a traditional woven ribbon tied around the candle base.

EUR31.79

Brass butterfly knob

Brass knob in classic design that fits Fontini recessed and surface mounted switches.

Wrath is sold individually.

EUR20.50

Brass cable strain relief

Gysinge’s cable strain relief is a beautifully crafted product with the task of supporting a pendant luminaire so that the lamp’s cable and not the electrical wire holds up the weight. Inside the dome-like brass housing is a threaded plastic part that clamps the cable.

EUR11.84

Brass ceiling hook 125 mm

Ceiling hook of a common model from the second half of the 19th century and the beginning of the 20th century. Mostly used as a lamp hook. The longest model was most often used for heavy ore and crystal chandeliers, the smallest for simple cobbler’s lamps and the like. The hook part is made of brass, the screw part of iron.

EUR16.85

Brass hand nipple

Brass hinge nipple. Highly sought after spare part for renovating old floor lamps. It is open inside and therefore without the risk of breaking the cord.

EUR9.02

Brass lamp holder

Lamp holder in brass. Spare part for cobbler’s lamp or other indoor lighting. Used with advantage together with cable strain relief.

Socket for E27. Grounded.

EUR22.32

Brass night light holder

Before the days of kerosene and electric light, a nightlight was a practical object used to move between dark rooms. It was also used as a bedside lamp, just as its name suggests.

Gysinge’s night candlestick is based on an early 19th century model. The candle holder is turned in advance and is height adjustable. The base is cast. High quality brass. Made and polished by hand by Morells klockgjuteri in Mora.

The candlestick has a lovely solid feel. Untreated brass. Height 110mm, diameter 100mm.

EUR51.47

Burner tube for kerosene lamp 6″

Burner tubes made of specially tempered and heat-resistant clear glass for our kerosene lamps.

Clear glass. Round burner tube 6”’. Length 130mm, diameter 34 mm.

EUR15.94

Burning tube for kerosene lamp 10″

Burner tubes made of specially tempered and heat-resistant clear glass for our kerosene lamps.

Clear glass. Round burner tube 10”’. Length 200 mm, diameter 40 mm.

EUR16.85

Candle 2-pack 40 cm

Making candles is an ancient craft. STHLM’s candle workshop on Södermalm, in Per-Anders Fogelström’s neighborhood and where Liljeholmens Ljusfabrik once stood, carries on the tradition.

Great care is taken to ensure that the candles feel genuine. When the candle mass is warm, the antique candles are carefully molded and shaped by hand.

The long burning time and beautiful flame are the result of the right mix of stearin, paraffin, wax and wick yarn.

EUR9.57

Candle holders for walling

This type of candleholder is sometimes found built into the wall of 18th century fireplaces. The idea is that with the white-glued stove as a reflector, you can create light in an entire room using only a small candle. Candle holders of this type were therefore normally walled into the front or outer side of the fireplace.

If you don’t have one of these candle holders, you can add it later by finding a joint in the wall, carefully drilling a hole and fixing the holder with plaster. Any damage to the plaster can then be painted over with new paint. The candle holder has a forged conical spout where the candle is placed. The spout is just as suitable for today’s standard candles, such as “antique candles” or crown candles, as for old-fashioned tallow candles. The back end of the holder is bent so that the candle holder sits firmly in the wall and cannot be pulled out. If you want to tap the candle holder into a timber wall, for example, you should first knock off this bend.

Hand forged linseed oil fired iron. High quality craftsmanship. Height 9 cm.

EUR69.69

Candles 4-pack 40 cm

Making candles is an ancient craft. Stockholm’s candle workshop on Södermalm, in Per-Anders Fogelström’s neighborhood and where Liljeholmens Ljusfabrik was once located, carries on the tradition. Great emphasis is placed on making the candles feel genuine. When the candle mass is hot, the antique candles are molded and shaped by hand. The long burning time and the beautiful flame are a result of the right mixture of stearin, paraffin, wax and wick yarn.

4-pack. Stearin, paraffin, wax and wick yarn. Length 40cm.

EUR17.76

Candles crown candles 4-pack 23 cm

2 pairs of handmade candles from Stockholms ljusstöperi.

EUR12.75

Cardboard shade for floor lamps

A much sought after product for loose lampshades for our popular floor lamps. Hand folded from sand colored paper. White on the inside and brown on the outside. Twisted from unbleached cotton.

EUR39.63

Cardboard shade for pitchfork lamp

A very popular product – loose lampshades for our popular fire fork lamps.

Screen width 22 cm. Hand folded from sand colored paper. Twisted from unbleached cotton.

EUR38.26

Ceiling bracket porcelain with groove complete

In the past, all lamps had some kind of ceiling bracket or ceiling rose. Porcelain ceiling brackets were mainly used for cobblers’ lamps. The porcelain bracket is mounted on an intermediate wooden bracket. Inside the ceiling bracket there is room for a “sugar cube” and a cord reliever.

Porcelain, glazed. Diameter 62 mm, height 28 mm.

Wooden plate and screw with balled head included. Wooden plate diameter 80 mm, height 11 mm.

EUR30.06

Ceiling bracket porcelain without groove complete

In the past, all lamps had some kind of ceiling bracket or ceiling rose. Porcelain ceiling brackets were mainly used for cobblers’ lamps. The porcelain bracket is mounted on an intermediate wooden bracket. Inside the ceiling bracket there is room for a “sugar cube” and a cord reliever.

EUR30.06

Clamping ring for outdoor lamp

Suitable clamping ring for our lamps Delsbo, Kvarn, Erkasgården and Skollampa. Keeps the enamel shade in place. The ring is included when purchasing the above lamps.

EUR5.01

Classic knob porcelain black

Black porcelain knob in classic design that fits Fontini’s recessed and surface-mounted switches.

The knobs are sold individually.

EUR10.02

Classic knob porcelain white

White porcelain knob in a classic design that fits Fontini’s recessed and surface-mounted switches.

The knobs are sold individually.

EUR8.65

Cord holder cobbler lamp black

Cord holder for cobbler’s lamp. Lamp holder in unpainted polished brass with ceramic base. A specially made cord relief relieves the cord so that it does not carry the entire weight of the luminaire.

Light source for E27 socket. 2 meters black twisted textile covered cable (3-wire, grounded) included. (Plug not included.)

EUR136.19

Cord holder cobbler lamp white

Cord holder for cobbler’s lamp. Lamp holder in unpainted polished brass with ceramic base. A specially made cord relief relieves the cord so that it does not carry the entire weight of the luminaire.

Light source for E27 socket. 2 m white twisted textile covered cable (3-wire, grounded) included. Plug not included.

EUR136.19

Cord holder grounded black with switch 2.7 m

Black cord rack. 270 cm. Textile-covered cable (3-wire, earthed) with cord switch and plug. The cord switch is mounted to be approximately 30 cm from the lamp.

EUR42.36

Related articles

It seems we can't find what you're looking for.

Please leave a comment what you think about our new webshop