Nail brush in oiled oak and white fiber. Double-sided nail brush that is both stylish and comfortable to hold.White fiber is elastic and water resistant with a certain stiffness but without becoming too hard, which makes the material comfortable and practical when cleaning hands and nails. The shorter stiffer bristles on the top of the brush effectively access and remove dirt under the nail.
Weight 38 g. Length 10 cm. Width 4 cm. Height 3cm
EUR16.05
Also suitable for window fittings after 1850, which are normally always nailed. Not galvanized, which makes painting easier.
ATTENTION! The arch wood should be pre-drilled to avoid cracking. Expect a consumption of about 40 nubb per window of two arches.
Rivet of iron with a hand-forged head. The head is flat and smooth and the rivet is therefore suitable for building fittings, such as flat hinges and door hinges, and for furniture fittings, such as table tops and other furniture which must have riveted hinges.
EUR15.13
Special nub for e.g. tensioning roofing and wall paper, for wallpapering etc. Thanks to its particularly sharp edge, the nub can first be pressed into the substrate by hand and then nailed with a hammer. 0.5 kg of nub is enough for 30-40 running meters or about 25 sqm of stretching paper.
Nubb for sealing strip in wool. One package contains about 100 blue iron nubs.
EUR7.24
A well-made three-tiered shelf modeled on a pantry in Gävle from the 1890s. A good example of the care that was put into the carpentry of even the simplest of living spaces.
EUR412.19
Pre-cut forage base, so-called scouring block. Height 16 cm.
Planed joinery based on models from the late 1800s and early 1900s. Planed after the model from our exhibition house “Andra bygget” from 1894 in Gysinge.
Because of their simple and rustic character, they are also useful in other contexts. The floor plinth, for example, has a shape that was already common in the 18th century. A complete room interior includes: Floor plinth, door and window linings, lining plinth, cornice and breast rail. For installation under door lining against floor.
Also sold by the meter.
EUR5.41
Perforated sheet metal with a four-leaf clover pattern for use as a valve grille indoors and outdoors, as a radiator cover, etc. Can be screwed or nailed directly to the wall, or framed. Untreated iron, therefore easy to paint in the desired color with, for example, linseed oil paint. Cloverleaf sheet.
EUR62.26
Perforated sheet metal with a four-leaf clover pattern for use as a valve grille indoors and outdoors, as a radiator cover, etc. Can be screwed or nailed directly to the wall or framed. Untreated iron, therefore easy to paint in the desired color with, for example, linseed oil paint. Cloverleaf.
Sheet of 20 x 30 cm. Thickness 1 mm. Permeability (air) 47%. Untreated steel sheet.
EUR17.33
Perforated sheet metal with a four-leaf clover pattern for use as a valve grille indoors and outdoors, as a radiator cover, etc. Can be screwed or nailed directly to the wall, or framed. Untreated iron, therefore easy to paint in the desired color with, for example, linseed oil paint. Cloverleaf.
Sheet of 50 x 50 cm. Thickness 1 mm. Permeability (air) 47%. Untreated steel sheet.
EUR39.34
Shelf for placing dishes and plates after a model from the 18th century from Ovansjö parish in Gästrikland. Four shelves, three of which are intended for plates. The original shelf is painted in English red with green front edges on shelves and support strips. Well made carpentry work. Unpainted.
EUR421.36
The plinth board included in our program of planed joinery from the second half of the 19th century is of a machine-planed variety that was common throughout the country. The model is usually called “French joinery” and was in production until well into the 20th century. There were normally two variants, one more lavish for finer rooms, such as the hall, atrium and salon. These rooms included, for example, three-part cornices and three-part high plinths. For simpler rooms, such as kitchens, bedrooms and chambers, carpentry was used with smaller dimensions and less complicated profiles. However, some of the moldings, such as linings and breast moldings, tend to be the same, regardless of whether they are in finer or simpler rooms.
The price is per meter.
EUR11.46
Potato stick in oiled birch for cooking and baking.
EUR10.55
Root vegetable brush in oiled birch and union mix. Union mix is strong and water resistant. This is a superb brush for scrubbing potatoes and root vegetables.
EUR13.30
Threaded rivet of iron with hand-forged head and square nut. The heads are flat and the rivets are therefore suitable for building fittings, but are primarily intended for furniture that needs to be riveted, such as tops for impact tables. An invaluable spare part for the furniture renovator!
Circle dimensions: length 30 mm, forged skull. Shank 6 mm. Square nut dimensions 13×13 mm
EUR20.17
A screw consists of a head, shank, thread and tip. The shape of the head determines what you can use the screw for.
The shape is designated as follows: TKS = wood screw, balled head. TFS = wood screw, countersunk. TKFS = wood screw, countersunk. The surface treatment can also be different.
The most common designations are:Fn = Nickel-platedMäss = BrassFZB = bright zinc-plated
EUR3.67
The shape is designated as follows:TKS = wood screw, balled head.TFS = wood screw, countersunk.TKFS = wood screw, balled countersunk. The surface treatment can also be different.
Sold per piece
EUR0.46
Slotted screw
The shape is designated as follows: TKS = wood screw, balled head. TFS = wood screw, countersunk. TKFS = wood screw, countersunk.
The surface treatment can also be different. The most common designations are:Fn = Nickel-platedMäss = BrassFZB = bright zinc-plated
