Model: Residential house from 1917, Munkhagsg 24, Mariefred
Period: 1880-1950
Screw not included.
Fitting screw number 16.
EUR21.86
Round handrails began to replace the profiled handrails in the first half of the 19th century. The model for our handrail comes from a farm in southern Dalarna and is one of the earliest we know of, probably made around 1820. The pole has sturdy hand-turned end knobs with a period look and iron wall brackets. The pole comes from a farm that was not quite finished. Therefore it is unpainted. A likely color scheme would have been gray with black knobs.
EUR99.75
The hollow edge moulding (price excl. edge moulding) included in our program of planed joinery from the second half of the 19th century is of a machine-planed variety that was common throughout the country. The model is usually called “French joinery” and was in production until well into the 20th century. There were normally two variants, one more lavish for finer rooms, such as the hall, atrium and salon. These rooms included, for example, three-part cornices and three-part high plinths. For simpler rooms, such as kitchens, bedrooms and chambers, carpentry was used with smaller dimensions and less complicated profiles. However, some of the moldings, such as linings and breast moldings, tend to be the same, regardless of whether they are in finer or simpler rooms.
The price is per meter.
EUR11.39
In the past, many windows were not meant to be opened. Blacksmithing was expensive, so normally only a few sashes were cut. This was common well into the 19th century, but has survived into the present day on outbuildings and farm buildings. Nails used for nailing window frames must be conical in shape so that they can be pulled out easily without chipping the wood of the frame (modern wire nails are completely unacceptable in this context). Furthermore, the nail should have a blunt head, so as not to damage the sashes when it is bent in. Therefore, horseshoe nails were often used, or sometimes stingers, both of which have these properties.
EUR0.18
Loose shelf in untreated pine with profiled edge at the bottom for our console ladder for kitchen shelf / pantry shelf or loose consoles. Based on a model from around 1905.
Shelf. Length 125 cm depth 28 cm. Thickness 2 cm. Unpainted.
Note! Brackets pictured are not included but can be purchased separately.
EUR70.60
Kitchen shelf in simple Art Nouveau style after a model from around 1905. Originally made as a counter shelf with shelves of rib where household utensils were placed for drainage.
Pine, untreated. One shelf. Length 125 cm, width 28 cm, height (bracket) 340 mm, thickness 2 cm.
Additional freight.
EUR145.30
Console for our kitchen shelf in simple Art Nouveau style after the model from around 1905. Originally made as a counter shelf with shelves of rib, where you put pots etc for drainage.
EUR42.36
Gränsfors Splitting Axes are, as the name suggests, made for splitting wood. The axes have a large and heavy head that is forged and ground to a concave shape with a relatively thin edge. The axes are made to cut along the wood fibers, unlike forest axes which are made to cut off the wood fibers. The concave shape of the splitting axes allows the edge to enter the wood easily and quickly, and then splits efficiently as the wider part pushes the wood apart. The unique shape also means that the axe head does not get stuck in the wood as easily as with a narrow axe head.
When splitting wood, the handle closest to the axe head is exposed to great stress as the handle can easily hit the wood being split. All Gränsfors splitting axes therefore come with a metal handle guard. To get a good grip on the axe, the handle is also grooved at the end.
All cleavers come with a vegetable-tanned leather blade guard and the Axe Book.
EUR182.20
Coat rack in pine after a model from around 1870. Turned knobs. The board is edged all around with carnis profile. Sturdy and useful for clothes, work clothes, in kitchens for towels and aprons, etc. Was usually painted in the same color as the other carpentry in the room. Two lengths, one with four knobs and one with six.
EUR54.20
Handrail knob for round handrail.
EUR16.85
Pedestal, planed carpentry late 19th century. Finished length 150 cm.
Our program of planed joinery from the second half of the 19th century is of a machine-planed variety that was common throughout the country. This model is known as ‘French carpentry’ and was in production until well into the 20th century. There were normally two variants, one more lavish for finer rooms, such as the hall, atrium and salon. These rooms included, for example, three-part cornices and three-part high plinths. For simpler rooms, such as kitchens, bedrooms and chambers, carpentry was used with smaller dimensions and less complicated profiles. However, some of the moldings, such as linings and breast moldings, tend to be the same, regardless of whether they are in finer or simpler rooms.
For simpler rooms:
Cornice, “gooseneck”, 22×95 mm/m
Door and window linings, 25×120 mm/m
Feed plinth, 25×1500 mm/m
Floor plinth, 21×145 mm/m
EUR20.50
A thinner version of Gysinge’s floor limestone, made in the well-known island tradition. Gysinge limestone has a unique 18th century surface treatment and a rustic look with an uneven surface and naturally broken edges. The surface is honed to the velvety feel that characterizes a stone floor naturally worn over centuries. This appearance makes the stone a perfect fit in a cultural-historical setting. With its rough character, this limestone, thanks to its thinner-than-normal thickness, is also sought after for new flooring in modern kitchens, hallways and bathrooms. Its rustic appearance means that it can also be used under and in front of tiled stoves, fireplaces, stoves and fireplaces. The limestone is manufactured especially for Gysinge.
Limestone from Öland.
Two colors are available: grey and red. The names of the colors are old and can be a bit misleading. For example, red is more of a rusty brown, while gray ranges from solid gray to mottled in various shades of gray.
EUR74.25
Gysinge’s floor limestone, made in the well-known island tradition. Gysinge limestone has a unique 18th century surface treatment and a rustic look with an uneven surface and naturally broken edges. The surface is honed to the velvety feel that characterizes a stone floor naturally worn over centuries. This appearance makes the stone a perfect fit in a cultural-historical setting. With its rough character, this limestone, thanks to its thinner-than-normal thickness, is also sought after for new flooring in modern kitchens, hallways and bathrooms. Its rustic appearance means that it can also be used under and in front of tiled stoves, fireplaces, stoves and fireplaces. The limestone is manufactured especially for Gysinge.
In the second half of the 19th century, limestone floors became popular again, this time often laid in a checkerboard pattern and with dense grouting. They were most often seen in public buildings, such as schools and railway stations, but they were just as common as kitchen and hallway floors in nicer apartments. In the 20th century, especially from the 1920s, the polished limestone floors become popular again, now especially in private homes and especially the gray limestone was very popular from the functional era to the 1950s in lavish properties and villas.
Gysinge’s limestone floors, like all other limestone at Gysinge, are made in the well-known island tradition. The limestone has a time-typical finely ground surface treatment, sharp edges and natural shadings in color and pattern. The surface is velvety, and the presence of clear fossils is common. This type of stone can also be used in front of stoves and fireplaces, which was popular at the time. The limestone is manufactured and cut especially for Gysinge.
Two colors are available: grey and red. The names of the colors are old and can be a bit misleading. Red, for example, is more of a rusty brown, while gray ranges from solid gray to mottled in various shades of gray.
EUR25.05
Gysinge’s own linseed has gone through all the processes required to become the highest quality.
Flax is long and weed-free, shredded, rooted, sheared, etc. It is soft and pliable, yet full-bodied and firm, with a fresh scent. It is excellent for spinning.
Loose bracket ladder for our pantry shelf. The price is for one bracket ladder.
Please note that the three shelves are not included but purchased separately and that the price is for a ladder. See related products.
EUR136.19
Hot-dip galvanized marlin.
EUR0.09
The tiled Metro is based on a common European model from the turn of the 20th century. The model was common in the metro stations of Paris and London, and it still appears in some stations 100 years later! Each tile is marked with Gysinge on the back.
The tile is thick and strong and has a vibrant surface because it is made by hand, tile by tile. It is glazed by hand and fired in old kilns. The hand glazing makes the surface vibrant and shimmering. A larger surface tiled with our tile therefore gives the same impression as an old hand-beaten tile oven.
Tip: allow for 5-10% wastage when installing in corners and when tiles may break during drilling.
0.5sqm/25 tiles in one package. Swedish handmade tile. White glazed by hand. Height 10cm, length 20cm, thickness 1.4cm.
EUR168.08
EUR7.74
The intermediate board is part of our program of planed joinery from the latter part of the 19th century. A machine planed variety that was common throughout the country.
This model is known as ‘French carpentry’ and was in production until well into the 20th century. There were normally two variants, one more lavish for finer rooms, such as the hall, atrium and salon. These rooms included, for example, three-part cornices and three-part high plinths. For simpler rooms, such as kitchens, bedrooms and chambers, carpentry was used with smaller dimensions and less complicated profiles. However, some of the moldings, such as linings and breast moldings, tend to be the same, regardless of whether they are in finer or simpler rooms.
Purchased on site in our store in Gysinge.
EUR8.20
The Gränsfors Model 1900 Log House Moulder has a traditional shape and is suitable for moulding logs and planks, for example when building houses. The car differs greatly depending on the design of the forging, grinding and shank angle.
The head of the car in relation to the edge comes in two variants. The most common is that the blade of the axe is centered in relation to the head and the eye. It is also possible to special order a variant where the axe blade is not centered in relation to the head, which allows the car to slide along the log, without the axe head touching the log with the eye.
The car’s grinding is available in three different variants. As a rule, the beam is sharpened on both sides of the edge (knife-sharpened). The double-sided sharpening is often used for knot cutting, but also for all kinds of timber and plank cutting. The axe can also be specially ordered sharpened on one side only (scissor-sharpened). On a scissor-sharpened axe, the side of the balance that does not have a sharpened edge bevel is usually completely flat and forms the right side of the edge. The left side of the edge is the side that is sharpened. The flat side of the axe is more “aggressive” and is used when the log needs to be really smooth and is used, among other things, for longitudinal edging of timber. The opposite side is used instead when the log should have a small “wave pattern” and thus not be as smooth. Reverse scissor grinding can also occur, which is the exact opposite of scissor grinding.
The angle of the bilan on the shaft is available in three different variants. The bilan is usually straight, which means that the blade is parallel to the shaft. The bilan can also be specially ordered with the blade angled to the right (right-angled) or to the left (left-angled). When the blade is angled to the right or left, the handle and hands are away from the workpiece when the user is driving. This reduces the risk of hands hitting the workpiece. To know if the axe is right- or left-handed, hold the axe with the head up and the handle down with the neck facing you. If the edge is tilted to the right, the axe is right-handed and if it is tilted to the left, it is left-handed.
EUR264.19
The mouldings in our program of planed joinery from the second half of the 19th century are of a machine-planed variety that was common throughout the country. The model is usually called “French joinery” and was in production until well into the 20th century. There were normally two variants, one more lavish for finer rooms, such as the hall, atrium and salon. These rooms included, for example, three-part cornices and three-part high plinths. For simpler rooms, such as kitchens, bedrooms and chambers, carpentry was used with smaller dimensions and less complicated profiles. However, some of the moldings, such as linings and breast moldings, tend to be the same, regardless of whether they are in finer or simpler rooms.
BUY ON SITE in our store in Gysinge. Samples can be seen in our store in Stockholm.
EUR5.47
Nail brush in oiled oak and white fiber. Double-sided nail brush that is both stylish and comfortable to hold.White fiber is elastic and water resistant with a certain stiffness but without becoming too hard, which makes the material comfortable and practical when cleaning hands and nails. The shorter stiffer bristles on the top of the brush effectively access and remove dirt under the nail.
Weight 38 g. Length 10 cm. Width 4 cm. Height 3cm
EUR15.94
