Hand-forged nail 7"

SKU: 3031-100-7

Hand-forged nail 7″

EUR6.56

Available in central stock
Fast facts

Additional information

Weight 0.05 kg
Length

7"

So-called small nails, or pine nails, intended for normal carpentry needs, such as nailing of roof and wall panels, floors, linings, plinths, etc. in environments from before the middle of the 19th century. Hand-forged nails were replaced in the latter half of the 19th century by so-called rock nails.

When choosing the length of the nail, it is usually said that 1/3 should be in the board and at least 2/3 in the joist.

In general, the hand-forged nail can be divided into the following categories of use:

  • 1-1.5 inches Window fittings
  • 2 inches Hand-planed moldings, trim and other millwork
  • 3 inch wedge-sawn roof, wall and breast panels etc. internally. And for nailing wedge-sawn board lining on the outside.
  • 4 inches Larger board lining and for nailing cover strips on the outside.
  • 5 inch wedge-sawn floors etc. inside and for coarser joinery outside.

Hand-forged nail.

Description

So-called small nails, or pine nails, intended for normal carpentry needs, such as nailing of roof and wall panels, floors, linings, plinths, etc. in environments from before the middle of the 19th century. Hand-forged nails were replaced in the latter half of the 19th century by so-called rock nails.

When choosing the length of the nail, it is usually said that 1/3 should be in the board and at least 2/3 in the joist.

In general, the hand-forged nail can be divided into the following categories of use:

  • 1-1.5 inches Window fittings
  • 2 inches Hand-planed moldings, trim and other millwork
  • 3 inch wedge-sawn roof, wall and breast panels etc. internally. And for nailing wedge-sawn board lining on the outside.
  • 4 inches Larger board lining and for nailing cover strips on the outside.
  • 5 inch wedge-sawn floors etc. inside and for coarser joinery outside.

Additional information

Weight 0.05 kg
Length

7"

Reviews

There are no reviews yet.

Be the first to review “Hand-forged nail 7″”

Your email address will not be published. Required fields are marked *


The reCAPTCHA verification period has expired. Please reload the page.

You may also need to

Hand-forged nail 6″

EUR5.37

Add to cart

The big book on building conservation

EUR39.08

Add to cart

Related products

Clip nail 5″

A cut-off nail is a machine-forged nail with a tapered blade and a flat or semi-circular head. The tapered blade allows the nail to be pulled out without cracking the wood. After straightening the nail, it can be used again – unlike modern nails. Cut nails began to be produced in the latter part of the 19th century and gradually replaced hand-forged nails. The nail is cut from heavy steel plate, hence the name. In general, nails can be divided into the following categories of use.

  • 2.5 inches. For moldings, linings and interior joinery.
  • 3 inches. For nailing beadboard panels etc. internally. For nailing board lining on the outside.
  • 4 inches. For board lining and for nailing cover strips on the outside.
  • 5 inches. For nailing floors etc. internally.

EUR0.91

Hand-forged nail 1″

Hand-forged nail 1 inch.

When choosing the length of the nail, it is usually said that 1/3 should be in the board and at least 2/3 in the joist.

In general, the hand-forged nail can be divided into the following categories of use:

  • 1-1.5 inches Window fittings
  • 2 inches Hand-planed moldings, trim and other millwork
  • 3 inch wedge-sawn roof, wall and breast panels etc. internally. And for nailing wedge-sawn board lining on the outside.
  • 4 inches Larger board lining and for nailing cover strips on the outside.
  • 5 inch wedge-sawn floors etc. inside and for coarser joinery outside.

EUR2.10

Hand-forged nail 2″

So-called small nails, or pine nails, intended for normal carpentry needs, such as nailing of roof and wall panels, floors, linings, plinths, etc. in environments from before the middle of the 19th century. Hand-forged nails were replaced in the latter half of the 19th century by so-called rock nails.

When choosing the length of the nail, it is usually said that 1/3 should be in the board and at least 2/3 in the joist.

In general, the hand-forged nail can be divided into the following categories of use:

  • 1-1.5 inches Window fittings
  • 2 inches Hand-planed moldings, trim and other millwork
  • 3 inch wedge-sawn roof, wall and breast panels etc. internally. And for nailing wedge-sawn board lining on the outside.
  • 4 inches Larger board lining and for nailing cover strips on the outside.
  • 5 inch wedge-sawn floors etc. inside and for coarser joinery outside.

EUR2.37

Hand-forged nail 3″

So-called small nails, or pine nails, intended for normal carpentry needs, such as nailing of roof and wall panels, floors, linings, plinths, etc. in environments from before the middle of the 19th century. Hand-forged nails were replaced in the latter half of the 19th century by so-called rock nails.

When choosing the length of the nail, it is usually said that 1/3 should be in the board and at least 2/3 in the joist.

In general, the hand-forged nail can be divided into the following categories of use:

  • 1-1.5 inches Window fittings
  • 2 inches Hand-planed moldings, trim and other millwork
  • 3 inch wedge-sawn roof, wall and breast panels etc. internally. And for nailing wedge-sawn board lining on the outside.
  • 4 inches Larger board lining and for nailing cover strips on the outside.
  • 5 inch wedge-sawn floors etc. inside and for coarser joinery outside.

EUR2.92

Nit forged

Rivet of iron with a hand-forged head. The head is flat and smooth and the rivet is therefore suitable for building fittings, such as flat hinges and door hinges, and for furniture fittings, such as table tops and other furniture which must have riveted hinges.

EUR15.03

Clip nail 5″ 100 pcs

A cut-off nail is a machine-forged nail with a tapered blade and a flat or semi-circular head. The tapered blade allows the nail to be pulled out without cracking the wood. After straightening the nail, it can be used again – unlike modern nails. Cut nails began to be produced in the latter part of the 19th century and gradually replaced hand-forged nails. The nail is cut from heavy steel plate, hence the name. In general, nails can be divided into the following categories of use.

  • 2.5 inches. For moldings, linings and interior joinery.
  • 3 inches. For nailing beadboard panels etc. internally. For nailing board lining on the outside.
  • 4 inches. For board lining and for nailing cover strips on the outside.
  • 5 inches. For nailing floors etc. internally.

EUR78.80

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop