Spiral bud

SKU: 3031-102

Spiral bud

EUR30.17

Available in central stock
Quick facts

Additional information

Weight 0.05 kg

Spiral knob of old standard model for iron stoves. chromed iron. The knob can be tightened to make it shorter, or lengthened by loosening the screw with a screwdriver.

Iron, chromed. Length 80 mm, diameter 30 mm.

Description

Spiral knob of old standard model for iron stoves. chromed iron. The knob can be tightened to make it shorter, or lengthened by loosening the screw with a screwdriver.

Additional information

Weight 0.05 kg

Reviews

There are no reviews yet.

Be the first to review “Spiral bud”

Your email address will not be published. Required fields are marked *


The reCAPTCHA verification period has expired. Please reload the page.

You may also need to

The heat in old houses

EUR25.22

Add to cart

Refractory clay mortar

EUR36.59

Add to cart

Kitchen hook chrome

EUR45.39

Add to cart

Related products

Damper chain nickel plated

Chains of the so-called patent model to be used for draft dampers on tiled stoves, spiral valves, etc. Thin, flexible and supple, yet strong and durable.

Can be mounted in two ways; Firstly, as a hanging arc in a single length. This method is suitable for spiral valves, for example. Partly hanging in two lengths with damper tassels as termination. This was common on the draught dampers of tiled stoves.

Normally, 150-200 cm of chain is needed depending on how high the stove is and how far down you want the chain to hang. The easiest way to shorten or cut the chain is with wire cutters.

Nickel-plated brass. Width 3 mm, price per meter.

EUR8.07

Old-fashioned spike pain

Genuine old-fashioned Swedish spissvärta made from traditional old-fashioned recipes and contains no solvents, only natural ingredients.

When you want to freshen up and restore the luster of your old rusty iron stove or other indoor iron.

EUR11.83

Dam solution

Great for repairing glaze damage on tiled stoves etc.

Pond varnish is traditionally used on tiled stoves instead of linseed oil paint. This is because pond varnish does not turn yellow when the stove gets hot.

Prepare the duster solution in the same way as when making linseed oil paint. Stir the color pigments with the dust solution to form a porridge. Then dilute with additional solution to the appropriate consistency. If the kiln is really old and dull, you can dilute the colored duster solution with turpentine, so that it becomes less shiny. If the damage to the glaze consists only of small scratches or occasional chips, it is usually sufficient to paint over them with a dusting solution as above, and omit the plasterwork altogether. With the right color in the wounds, they will disappear to the eye anyway. Repeat the treatment if the paint did not cover enough the first time.

Tips! V years of experience is that Gysinge linseed oil paint does not yellow like others. Therefore, as an alternative to a dust solution, try painting the damage with Gysinge paint instead.

EUR13.66

Tiled stove joint

On tiled stoves, the gaps between the tiles and between the door frame and vents are usually grouted with a special stove grout. This grout is “softer” and more pliable than the tile grout normally used to grout wall tiles.

The reason why the joint is softer is that a tiled stove, when fired and cooled, shrinks and swells much more than wall and floor tiles.

Gysinge’s ready-mixed stove grout is based on a traditional mixture of chalk and titanium white. It is therefore white in color and is most suitable for white ovens. If you have a colored oven, you add pigment in the appropriate color and stir well before stirring it all out with water.

Instructions are included in the package. It is also available in PDF format under the heading Documents (at the Add to cart button).

Tips! The bucket contains enough for several ovens. Therefore, soak only the amount you need and save the rest for another time.

EUR13.66

Damper rods Jugend in brass

Tassels from the 1910s. Tassels from the turn of the 20th century are usually only turned, unlike those from the 19th century, which really resembled real tassels.

We have produced an Art Nouveau model with fine turning and care in the details. The model for this damper is from Tyskbo Bergsmanssmedja in By parish Horndal.

Untreated brass. Height 60mm.

EUR31.64

Soot hatch pressed nickel plated

Soot hatch on black plate support. Available in both polished brass and bright nickel-plated. Suitable as a soot hatch on tiled stoves, in walls, etc.

EUR52.73

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop