White textile cable in old-fashioned style. Approved double insulated and 3-wire (earthed). Silk-covered, glossy surface.

Dimensions: 3 x 0.75 mm². Purchased per whole meter. No right of return on this item as it is made to measure.

Smooth, round black porcelain ball box for surface mounting. Newly manufactured according to traditional model.

4 break walls on opposite sides.

ASSEMBLE AS FOLLOWS: Carefully tap out the break walls you intend to use. Screw the bottom of the box in place with suitable screws. Connect the cables. Screw the upper part in place with the appropriate screw.

Dimmer LED LDN200 from Vadsbo. Together with a spring-loaded push button, the dimmer creates a dimmer function.

The product does not require a zero when inserted and is therefore ideal for installation where the zero is missing in the appliance box or is difficult to access. The dimmer is mounted behind the switch or in the ceiling cup.

The dimmer is used for LED 0-200VA, 230V halogen and electronic transformers. The dimmer has a memory function and retains the last set light level when turning on and off. The product has an adjustable boost function and minimum and maximum dimming levels.

The dimming is controlled by one or more resilient pushbuttons. See for example: 31-330-17-2, 31-330-27-2, 3041-46-91

Chronic dimmer LD200KRON from Vadsbo. Together with a resilient push button, the dimmer creates a dimmer function.

Crown dimmer means two dimmers in the same enclosure. The product is designed to be installed in A or B boxes. Installed in an appliance or in a junction box, for example behind the switch or in the ceiling cup.

LD200KRON is specially adapted for dimming low energy and LED lamps. The dimmer is equipped with two control inputs and you can thus mix different loads on the outputs. The product can handle a load of up to 100VA per channel and has an adjustable minimum dimming level.

For example, the dimmer can be controlled by a resilient switch. See for example: 31-330-17-2, 31-330-27-2, 3041-46-91